Try just taking the cable out (of the library) and plugging it back in
again

Saves a reboot!

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Karel Bos
Sent: 17 December 2003 11:06
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: anyone had network problems with 3584?

Depends. :->

- SCSI attached to AIX, you don't have to shutdown TSM. Only end tape
operations, put drives off-line and reboot the library;
- SAN based, library path on SCSI drive behind SDG. Same as above;
- SAN based, library path on fiber drive, TSM on windows. Reboot
library,
SAN and windows.

Regards,

Karel

-----Oorspronkelijk bericht-----
Van: i love tsm [mailto:ilovetsm AT HOTMAIL DOT COM]
Verzonden: woensdag 17 december 2003 11:05
Aan: ADSM-L AT VM.MARIST DOT EDU
Onderwerp: Re: anyone had network problems with 3584?


Karel

Thanks for your response. I'll schedule a library reboot :-(

Did you just shutdown TSM Server, reboot library , restart TSM Server?

Regards

Chris

>From: Karel Bos <Karel.Bos AT NUON DOT COM>
>Reply-To: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
>To: ADSM-L AT VM.MARIST DOT EDU
>Subject: Re: anyone had network problems with 3584?
>Date: Wed, 17 Dec 2003 10:27:56 +0100
>
>Hi,
>
>Also having this problem on our 2 3584 libs. Seems to be that in case
of
>network problems/interrupts the library is unable to reconnect.
Rebooting
>the library solves this, but obviously is not the preferred option.
>Restarting the network on the library itself didn't work for us and we
>haven't found another way but rebooting the libraries.
>
>Regards,
>
>Karel
>
>-----Oorspronkelijk bericht-----
>Van: i love tsm [mailto:ilovetsm AT HOTMAIL DOT COM]
>Verzonden: woensdag 17 december 2003 10:10
>Aan: ADSM-L AT VM.MARIST DOT EDU
>Onderwerp: anyone had network problems with 3584?
>
>
>Hi All
>
>I just wondered if anyone else has had problems with their 3584's and
there
>network connectivity.
>
>The two 3584s that I run have both recently gone off the air,i.e I
can't
>ping them.  They both have green link lights on the NIC. They are set
to
>100/Full  although I have tried Auto and 100/half.
>The network switch port is set to 100/Full and sees a device connected
at
>the other end, its sending packets out to the library but not getting
any
>back.  I've tried disabling and reenabling ethernet on the libraries.
>Do I need to reboot the libaries?  Has anyone else had problems like
this?
>
>TIA
>Chris
>
>_________________________________________________________________
>Use MSN Messenger to send music and pics to your friends
>http://www.msn.co.uk/messenger

_________________________________________________________________
On the move? Get Hotmail on your mobile phone
http://www.msn.co.uk/msnmobile