Re: tape drive errors
2003-12-11 14:59:01
I just had this same error on a AIX 5.1 using a 3494 tape lib with 3590E
drives.
we found that the only solution that worked was to delete and redefine the
device description in the AIX environment. you can also try cycling your
server.
>>> kathie.foresti AT LMCO DOT COM 12/11/03 02:47PM >>>
We have a shared 3584 LTO library. We are getting the following errors:
Was logged as a hardware problem but may need to open it up as a TSM problem.
No errors show up with "errpt -a" on the AIX server.
12/11/03 13:13:36 ANR8779E Unable to open drive /dev/rmt3, error number=6.
12/11/03 13:20:41 ANR8779E Unable to open drive /dev/rmt5, error number=6.
ANR8779E
Explanation - The drive cannot be opened by the server. In AIX, error number
is the value of errno returned by the operating system.
System Action - The transaction needing the drive fails.
User Response - User error number in conjunction with operating system
documentation to narrow the scope of the cause. Inspect the drive. Ensure the
dirve is powered on and ready, the cables are properly connected and terminated
and that the device is properly configured to the operating system.
----
The drives have been cleaned, power cycled, etc.
Has anyone seen this or have any ideas?
> Kathie
> Kathie Foresti
> Lockheed Martin Corporation
> Enterprise Information Systems
> Phone (315)456-1941
> E-mail: Kathie.Foresti AT lmco DOT com
>
|
|
|