Re: Empty tape will not reclaim
2003-11-18 12:54:00
Audit vol J00840 fix=yes
That usually clears these issues up.
Al
Alan Davenport
Senior Storage Administrator
Selective Insurance Co. of America
alan.davenport AT selective DOT com
(973) 948-1306
-----Original Message-----
From: Conko, Steven [mailto:sconko AT ADT DOT COM]
Sent: Tuesday, November 18, 2003 11:53 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Empty tape will not reclaim
Strange problem. AIX 4.3.3, TSM 5.1.5.4.
Im trying to run reclamation on our copy storage pool. There is only one
tape left, and reclamation continually starts and ends successfully for it
without moving any data and no time passing:
11/18/03 06:53:26 ANR0984I Process 2215 for SPACE RECLAMATION started
in the BACKGROUND at 06:53:26.
11/18/03 06:53:26 ANR1040I Space reclamation started for volume
J00840, storage pool COPY_POOL_01 (process number 2215).
11/18/03 06:53:26 ANR0985I Process 2215 for SPACE RECLAMATION running
in the BACKGROUND completed with completion state SUCCESS at 06:53:26.
The volume in question reports as being "100% reclaimable", "0% utilized"
and status of "full" from a q vol:
>q vol j00840 f=d
Volume Name: J00840
Storage Pool Name: COPY_POOL_01
Device Class Name: 3590CLASS
Estimated Capacity (MB): 87,784.5
Pct Util: 0.0
Volume Status: Full
Access: Offsite
Pct. Reclaimable Space: 100.0
Scratch Volume?: Yes
In Error State?: No
Number of Writable Sides: 1
Number of Times Mounted: 5
Write Pass Number: 1
Approx. Date Last Written: 11/06/03 16:02:32
Approx. Date Last Read: 11/11/03 16:04:00
Date Became Pending:
Number of Write Errors: 0
Number of Read Errors: 0
Volume Location: VAULT
Last Update Date/Time: 11/11/03 16:09:25
>From the database output I get a report that it is "99.9% reclaimable".
>select * from volumes where volume_name='J00840'
VOLUME_NAME: J00840
STGPOOL_NAME: COPY_POOL_01
DEVCLASS_NAME: 3590CLASS
EST_CAPACITY_MB: 87784.4
PCT_UTILIZED: 0.0
STATUS: FULL
ACCESS: OFFSITE
PCT_RECLAIM: 99.9
SCRATCH: Yes
ERROR_STATE: No
NUM_SIDES: 1
TIMES_MOUNTED: 5
WRITE_PASS: 1
LAST_WRITE_DATE: 2003-11-06 16:02:32.000000
LAST_READ_DATE: 2003-11-11 16:04:00.000000
PENDING_DATE:
WRITE_ERRORS: 0
READ_ERRORS: 0
LOCATION: VAULT
CHG_TIME: 2003-11-11 16:09:25.000000
>move data j00840 stgp=copy_pool_01
ANR2232W This command will move all of the data stored on volume J00840 to
other volumes within the same storage pool; the data will be
inaccessible to users until the operation completes.
Do you wish to proceed? (Yes (Y)/No (N)) y
ANR2209W Volume J00840 contains no data.
ANS8001I Return code 11.
>q content j00840
ANR2034E QUERY CONTENT: No match found using this criteria.
ANS8001I Return code 11.
Any idea what is going on?
Thanks in advance,
Steve
|
|
|