Dear juean,


The command u are using is valid if your volumes are already lablled and are 
ready to go to scratch.So run AUDIT LIBRARY


syntax is audit library 3584_lib .This will remove the inconsistencies of the 
volume labels.


And if your volumes are fresh ,then first label these volumes using 
checkin=scratch option  and the checkin in the library.




"ADSM: Dist Stor Manager" wrote:



Hmmm,
for fresh tapes use 'label libvol .... checkin=scratch'


On Monday, Oct 6, 2003, at 21:26 Europe/Amsterdam, Juan Jose Reale
wrote:

> Hi! Everyone!
> I used the following command to add a storage volume xxxxx into our
> library 3584_library:
> Checkin libvolume 3584_lib search=bulk status=scratch
> checklabel=barcode
>
> And you can see the following results:
> ANR8422I CHECKIN LIBVOLUME: Operation for library 3584_LIB started as
> process 4.
> 10/06/03 13:36:58 ANR0609I CHECKIN LIBVOLUME started as process 4.
> 10/06/03 13:37:43 ANR8431I CHECKIN LIBVOLUME process completed for
> library 3584_LIB; 2 volume(s) found.
> 10/06/03 13:37:43 ANR0985I Process 4 for CHECKIN LIBVOLUME running
> in the BACKGROUND completed with completion state SUCCESS at 13:37:43.
>
> but after about 20 minutes it generated the following error messages:
> ANR8355E I/O error reading label for volume 000105 in drive
> 3584_DRIVE2 (/dev/rmt2).
> ANR8778W Scratch volume 000105 changed to Private Status to prevent
> re-access.
> ANR8355E I/O error reading label for volume 000106 in drive
> 3584_DRIVE2 (/dev/rmt2).
> ANR8778W Scratch volume 000106 changed to Private Status to prevent
> re-access.
> ANR8355E I/O error reading label for volume 000089 in drive
> 3584_DRIVE2 (/dev/rmt2).
> ANR8778W Scratch volume 000089 changed to Private Status to prevent
> re-access.
>
> I don't know what the matter is. Well, all those labeled tapes are
> new. I am using library 3584 IBM and TSM in AIX Server.
> I look forward to your reply. Regards.
> Juan Reale.
>
>
> _______________________________________________________________________
> _
> This email has been scanned for all viruses by the MessageLabs service.
>
--
Met vriendelijke groeten,

Remco Post

SARA - Reken- en Netwerkdiensten http://www.sara.nl
High Performance Computing Tel. +31 20 592 8008 Fax. +31 20 668 3167

"I really didn't foresee the Internet. But then, neither did the
computer
industry. Not that that tells us very much of course - the computer
industry
didn't even foresee that the century was going to end." -- Douglas Adams

 Click onthe image to chat with me