And it still could be an element number mis-match as well.

Drives sometimes get detected as different serial numbers on the different
systems.  Check the serial numbers for the drives with "lscfg -vl rmt#"...
and then match those to proper element numbers and what-not on the TSM
Server. 

Also, the lan-free agent has to be the same version as the TSM Server
itself. 

------------------------------------
David N. Reiss          407-736-3912
TSM Support Engineer
david.reiss AT siemens DOT com
...one of God's own prototypes -- a high-powered mutant of some kind who was
never even considered for mass production. He was too weird to live and too
rare to die.

-----Original Message-----
From: Vazquez Vegas, Sergio [mailto:svazquez AT ENDESA DOT ES]
Sent: Wednesday, September 24, 2003 10:35 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: AIX Lan Free


The device must be available in OS. Run the command: 
        lsdev -Cc tape
in order to check this.

Sergio Vázquez Vegas
Administración TSM
*: 104688 - 912134688
*: svazquez AT endesa DOT es


-----Mensaje original-----
De: Michael, Monte [mailto:monte.michael AT PIONEER DOT COM]
Enviado el: miércoles, 24 de septiembre de 2003 16:14
Para: ADSM-L AT VM.MARIST DOT EDU
Asunto: AIX Lan Free


I am currently setting up a LAN free environment on one of our AIX clients.
Our environment is as follows:

AIX 5.1.7.0 server
AIX client 5.1.5.10

The install and setup went well, but I am recieving the following error when
trying to mount a tape:

09/23/2003 16:20:21      ANR8779E (Session: 43476, Origin: SP06STA)  Unable
to open
                          drive /dev/rmt16, error number=46.

Any clues?

Thank You,

...Monte



This communication is for use by the intended recipient and contains
information that may be privileged, confidential or copyrighted under
applicable law.  If you are not the intended recipient, you are hereby
formally notified that any use, copying or distribution of this e-mail,
in whole or in part, is strictly prohibited.  Please notify the sender
by return e-mail and delete this e-mail from your system.  Unless
explicitly and conspicuously designated as "E-Contract Intended",
this e-mail does not constitute a contract offer, a contract amendment,
or an acceptance of a contract offer.  This e-mail does not constitute
a consent to the use of sender's contact information for direct marketing
purposes or for transfers of data to third parties.

 Francais Deutsch Italiano  Espanol  Portugues  Japanese  Chinese  Korean

            http://www.DuPont.com/corp/email_disclaimer.html

Este mensaje de correo electrónico y sus documentos adjuntos están dirigidos
EXCLUSIVAMENTE a los destinatarios especificados. La información contenida
puede ser CONFIDENCIAL y/o estar LEGALMENTE PROTEGIDA y no necesariamente
refleja la opinión de ENDESA. Si usted recibe este mensaje por ERROR, por
favor comuníqueselo inmediatamente al remitente y  ELIMÍNELO ya que usted
NO ESTA AUTORIZADO al uso, revelación, distribución, impresión o copia de
toda o alguna parte de la información contenida. Gracias. 

This e-mail message and any attached files are intended SOLELY for the
addressee/s identified herein. It may contain CONFIDENTIAL and/or LEGALLY
PRIVILEGED  information and may not necessarily represent the opinion of
ENDESA. If you receive this message in ERROR, please immediately notify the
sender and DELETE it since you ARE NOT AUTHORIZED  to use, disclose,
distribute, print or copy all or part of the contained information. Thank
you.