Please read -r(re-boot) as --r(re configure boot)
Thanks
Balanand Pinni
-----Original Message-----
From: PINNI, BALANAND (SBCSI)
Sent: Thursday, September 04, 2003 2:45 PM
To: '"Maxim Baturin" '
Subject: RE:
If I am right you can physically remove drive and reboot with -r(reconfigure
for SUN only else shutdown -Fr now for AIX ) option and connect back again
and do the same .Now new drive path will be assigned as character special
device .Now define TSM drive on SUN /AIX and see that you can access it
using respective OS cmds .
If all seems ok after checking status of drive that gets configured as TSM
drive ,go for defining library .Usually library does not get defined if TSM
Drive is not recognized.
Balanand Pinni
-----Original Message-----
From: "Maxim Baturin" [mailto:mbaturin AT mail DOT ru]
Sent: Thursday, September 04, 2003 2:28 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject:
Hi Al!
I deleted drive and path in TSM and created them again...
Basicaly, I already deleted library and drive and path for both of them and
created them again in M... but still no luck....
Looks like some kind logical error in TSM...
because checkin and checkout with checklabels from tapes works just fine....
:-((
>Maxim,
>When you say "deleted and redefined drives" what
> that in Solaris or TSM? I've had similar
>situations (on AIX) and was successful
> delete/redefining drives 1st on the OS, then in TSM.
>Al
>allen.barth AT DB DOT COM
Subject: ANR8447E No drives are currently available in library
Hi everybody!
I checked archives, and found some similar problems but without resolution
((
So, may be some body already got the answer.
After upgrading Solaris 8 to Solaris 9 and TSM from 5.1.6 to 5.1.7 our links
in /dev/rmt changed order, so we had to update path defenitions to new
devices names (2mt become 1mt and 0lb become 2lb) updating path for library
was successful, but drive not... I continiusly was getting - invalid request
for update path.... bla bla bla...
So I deleted path and drive and recreated them.
After everything started to work for the first look (checkout and checkin
works just fine - that means drive can read labels from tapes - library does
not have barcode reader) But in any action which require to mount volume I'm
getting the follow
messages:
ANR8447E No drives are currently available in library DLT1LIB. ANR1401W
Mount request denied for volume DLT819 - mount failed.
It is DELL PV120TDLT1 library with only one Benchmark DLT1 drive so mount
limit is 1 in devclass definition (i danced around with all possible values
- mount limit drives, format =drives, dlt40, dlt40c, dlt1,
dlt1c) and nothing helped.....
restarting tsm couple time also does not make any effect
Does any body have any idea what I can do?
May be there is exist some options to get more detailed log?
Regards,
Maxim
batourine_m AT ald.utoronto DOT ca
|
