Hi,

thanks for the reply,

when you say a "router" you mean a data gateway, the gizmo that connects
scsi to fiber right?

I have one also a compaq "Modular Data Gateway",

but i think it's a firmware problem on the drives
the firmware on the drives is V51.

Regards,
Joao Amador

--------- Original Message --------
From: "Steve Argersinger" <sargersi AT ruan DOT com>
To: "'Citsm'" <citsm AT systemhouse DOT pt>
Subject: RE: HP/COMPAQ MSL5026 Library San
Date: 24/07/03 14:16


We installed a "router" card into the 5026 and have it working successfully,
but it was in a Windows environment. Several things need to happen: you
need to configure the router itself so that the TSM server can see it and
manage it properly. You also need to make sure your TSM server and router
card are both in the same zone. Finally, I had issues with the device
manager not running automatically. Once it started up, I could see
everything just fine.

Hope it helps.

Steve Argersinger
Ruan Transportation


When you talk about
-----Original Message-----
From: Citsm [mailto:citsm AT SYSTEMHOUSE DOT PT]
Sent: Thursday, July 24, 2003 7:59 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: HP/COMPAQ MSL5026 Library San

Hi,

Has anyone been able to get a MSL5026 Library working with TSM Server 5.1.6
on Aix thru a San
Gateway.

The Libray changer is detected ( LB0.X.X ) but
there is no sign of the drives ( RMTX.X.X ).

Regards,
Joao Amador