That's curious!!! Now I'm in doubt. I think that you have to use the TSM
SCSI Device Driver. What I'm not seeing is the library device. It's
something like "lb0". If not first try to create through SMIT DEVICES ->
Tivoli Storage Manager Devices -> SCSI Attached Devices ->
Library/MediumChanger -> Add a Library/MediumChanger. Select the type ADSM
library and the controller. In your case is the controller connected on slot
1P-08. The connection address seems to be 3,0. After that try to define the
devices:
tsm> define library <library_name> libt=scsi
tsm> define path <source_name> <dest_name> srct=server destt=library
device=/dev/lb0
tsm> define drive <library_name> <drive_name> element=31
tsm> define drive <library_name> <drive_name> element=32
tsm> define path <source_name> <dest_name> srct=server destt=drive
device=/dev/mt1
tsm> define path <source_name> <dest_name> srct=server destt=drive
device=/dev/mt2

Regards,

Anderson

----- Original Message -----
From: "Scott Figgins" <scottf AT FIG.HOMEIP DOT NET>
To: <ADSM-L AT VM.MARIST DOT EDU>
Sent: Monday, June 23, 2003 10:17 AM
Subject: Re: oops forgot the error message.


Anderson/Group -

# lsdev -Cc tape
rmt0 Available 1P-08-00-0,0 4.0 GB 4mm Tape Drive
rmt1 Available 1P-08-00-2,0 4.0 GB 4mm Tape Drive
smc0 Available 1P-08-00-3,0 IBM 7336 Tape Medium Changer
# lsdev -Cc adsmtape
mt0 Available 1P-08-00-0,0 Tivoli Storage Manager Tape Drive
mt1 Available 1P-08-00-2,0 Tivoli Storage Manager Tape Drive
#
I used the Webgui to define the library. But nowhere on that panel does it
ask
for any scsi ID or anything. Just a Library name and if it's shared or not.

Thanks again everyone.
Scott





They show up here.. But when I try to install the



Quoting "Anderson F. Nobre" <afnobre AT UOL.COM DOT BR>:

> Scott,
>
> Are you using the TSM SCSI Device Driver?
> If yes, what's the target and LUN that you are using to define the library
> device?
> Can you type the following commands and show us the output?
> # lsdev -Cc tape
> # lsdev -Cc adsmtape
>
> Regards,
>
> Anderson
>
> ----- Original Message -----
> From: "Scott Figgins" <scottf AT FIG.HOMEIP DOT NET>
> To: <ADSM-L AT VM.MARIST DOT EDU>
> Sent: Monday, June 23, 2003 12:46 AM
> Subject: oops forgot the error message.
>
>
> I'm getting this error in my Server log on AIX 5.1 with TSM 5.1.6.5 after
> defining a 7336-205 4mm Tape library. Any ideas? IBM says this library is
> supported in the BASE codeset.
>
> 06/22/03 22:54:26     ANR8843E Initialization failed for SCSI library
> AUTOLIB1 -
>                        the library will be inaccessible.
> 06/22/03 22:54:26     ANR8441E Initialization failed for SCSI library
> AUTOLIB1.
>
>
>
> Any help is appreciated.
> Scott Figgins
> IBM Cate
> ScottF AT fig.homeip DOT net
>
> -------------------------------------------------
> This mail sent through IMP: http://horde.org/imp/
>




-------------------------------------------------
This mail sent through IMP: http://horde.org/imp/