From: Scott Figgins [mailto:scottf AT FIG.HOMEIP DOT NET] 
# lsdev -Cc tape
rmt0 Available 1P-08-00-0,0 4.0 GB 4mm Tape Drive
rmt1 Available 1P-08-00-2,0 4.0 GB 4mm Tape Drive
smc0 Available 1P-08-00-3,0 IBM 7336 Tape Medium Changer
# lsdev -Cc adsmtape
mt0 Available 1P-08-00-0,0 Tivoli Storage Manager Tape Drive
mt1 Available 1P-08-00-2,0 Tivoli Storage Manager Tape Drive
#
I used the Webgui to define the library. But nowhere on that panel does it ask
for any scsi ID or anything. Just a Library name and if it's shared or not.
===================
 
Remember the installation steps for a library at the 5.1 level:
 
1--define library (requirements: name, libtype)
2--define devclass (requirements: library name,media type)
3--define drives (requirements: library name,element number)
4--define path for library(requirements: device definition)
5--define path for drives (requirements: library name, device definition)
 
Items #4 and #5 are new to TSM 5.1. Refer to your TSM Administrator's Guide for 
detailed instructions.
 
--
Mark Stapleton (mark.stapleton AT berbee DOT com)