ADSM-L

Re: Define LTO Drives

2003-05-12 15:07:51
Subject: Re: Define LTO Drives
From: Hegedus György <hegedusgy AT MEGATREND DOT HU>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Mon, 12 May 2003 21:06:46 +0200
Christian,

I also tried to use the TSM Drivers unsuccessfully. But then I found an
article at IBM that the LTO drives need native driver in contrast to the
"Installation Guide".

GY

-----Original Message-----
From: Christian Astuni [mailto:astunich AT HOTMAIL DOT COM]
Sent: Monday, May 12, 2003 8:48 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: Define LTO Drives

Thank you very much, Zlatko ....
I'm not happy with this state... I have been reading in same bookd that the
best method to defining drives is under TSM Drivers ... but no problem ... I
define this with the native drivers, and let you later.

Thank you very much at all...
Have a nice day.

Christian


>From: Zlatko Krastev/ACIT <acit AT ATTGLOBAL DOT NET>
>Reply-To: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
>To: ADSM-L AT VM.MARIST DOT EDU
>Subject: Re: Define LTO Drives
>Date: Mon, 12 May 2003 21:11:01 +0300
>
>The officially supported method is to use IBM LTO driver for drives and
>TSM driver for library changer/robot. Therefore it is reasonable why you
>get these results.
>Are not you happy with current state?
>
>Zlatko Krastev
>IT Consultant
>
>
>
>
>
>
>Christian Astuni <astunich AT HOTMAIL DOT COM>
>Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
>12.05.2003 14:37
>Please respond to "ADSM: Dist Stor Manager"
>
>
>         To:     ADSM-L AT VM.MARIST DOT EDU
>         cc:
>         Subject:        Define LTO Drives
>
>
>Hi ... TSM'ers
>
>I have a question ... to defining LTO drives.
>I have a TSM 5.1.6.4 over Windows 2000. And I'm using a library LTO 3583
>with two drives 3580.
>
>I had problems when I want to define this drives using TSM Device drives.
>This is the error:
>
>05/05/2003 15:54:02   ANR2017I Administrator TCZQUP issued command: DEFINE
>PATH            sartsm1 LTO1 SRCTYPE=SERVER DESTTYPE=DRIVE LIBRARY=TCSLI-
>B2C DEVICE=MT0.2.0.5 ONLINE=YES
>
>05/05/2003 15:54:02   ANR8779E Unable to open drive MT0.2.0.5, error
>number=2.
>05/05/2003 15:54:02   ANR8420E DEFINE PATH: An I/O error occurred while
>accessing drive LTO1.
>
>If I define the same drives, but using the Windows 2000 drivers I dont
>have
>problmes, and I can define ok. My quetions is there are any method to
>define
>the 3580 using the drivers of TSM ???? What is the methods ???
>
>Thank's in advance
>Best regards
>Christian Astuni
>
>_________________________________________________________________
>Charla con tus amigos en lmnea mediante MSN Messenger:
>http://messenger.yupimsn.com/

_________________________________________________________________
Charla con tus amigos en lmnea mediante MSN Messenger:
http://messenger.yupimsn.com/

<Prev in Thread] Current Thread [Next in Thread>