Re: Help,
2003-04-10 08:52:33
I think you are correct, you have to use the "IBM device driver" for
Ultrium drives, look at
http://www-3.ibm.com/software/sysmgmt/products/support/IBM_TSM_Supported_Devices_for_AIXHPSUNWIN.html
which if you scroll down to the ultrium section (assuming they are IBM
ultrium drives), it states that the IBM device driver is required...Hope
this helps. Unfortunately I don't have any experience dealing with Ultrium
Drives in a SAN type environment (ask me again in 2 months :) so... Just a
thought.
Jonathan Kaufman
Foot Locker Inc.
E-Mail: jkaufman AT footlocker DOT com
To: ADSM-L AT VM.MARIST DOT
EDU
cc:
Jozef Zatko Subject: Re: Help,
<zatko AT LOGIN DOT SK
>
Sent by: "ADSM:
Dist Stor
Manager"
<ADSM-L AT VM DOT MARI
ST.EDU>
04/10/2003
04:33 AM
Please respond
to "ADSM: Dist
Stor Manager"
Hi,
I am not AIX expert, but in my AIX environment I see something similar.
I think error messages are from TSM device driver, which does not support
IBM Ultrium devices.
You have to use IBMtape device driver for this devices. The second part of
your output from lsdev command (devices with state Available) show that
your IBMtape device driver is working OK. In your TSM definitions use
device names from IBMtape device driver.
If you do not use another SCSI devices, I think you can uninstall TSM
device driver (there are no devices controlled with it).
My 2 cents
Ing. Jozef Zatko
Login a.s.
Dlha 2, Stupava
tel.: (421) (2) 60252618
Murthy V
Gongala To: ADSM-L AT VM.MARIST DOT EDU
<[email protected] cc:
BM.COM> Subject: Help,
Sent by:
"ADSM: Dist
Stor Manager"
<ADSM-L AT VM DOT MA
RIST.EDU>
09.04.2003
17:17
Please
respond to
"ADSM: Dist
Stor Manager"
Hi,
I have TSM 4.2.1 on AIX 5.1, running on a pSeries machine. Recently
installed 2 HBA's(6228) on the server to connect it to SAN.
When i ran the Discover SAN attached devices from smitty i am getting the
following error.
TSM Define Methods done !!!!
Method error (/etc/methods/cfgtsmdd):
0514-051 Device to be configured does not match the physical
device at the specified connection location.
Method error (/etc/methods/cfgtsmdd):
0514-051 Device to be configured does not match the physical
device at the specified connection location.
Method error (/etc/methods/cfgtsmdd):
0514-051 Device to be configured does not match the physical
device at the specified connection location.
Method error (/etc/methods/cfgtsmdd):
0514-051 Device to be configured does not match the physical
device at the specified connection location.
TSM Config Methods done !!!!
====================== TSM Devices ====================
lb0 Defined 20-58-01 Library/MediumChanger
mt0 Defined 20-58-01 Tape Drive
mt1 Defined 20-58-01 Tape Drive
mt2 Defined 20-58-01 Tape Drive
Output of lsdev -Cc tape
smc1 Available 20-58-01 IBM 3583 Library Medium Changer (FCP)
rmt17 Available 20-58-01 IBM 3580 Ultrium Tape Drive (FCP)
rmt18 Available 20-58-01 IBM 3580 Ultrium Tape Drive (FCP)
rmt19 Available 20-58-01 IBM 3580 Ultrium Tape Drive (FCP)
smc2 Available 20-60-01 IBM 3583 Library Medium Changer (FCP)
rmt20 Available 20-60-01 IBM 3580 Ultrium Tape Drive (FCP)
rmt21 Available 20-60-01 IBM 3580 Ultrium Tape Drive (FCP)
rmt22 Available 20-60-01 IBM 3580 Ultrium Tape Drive (FCP)
Could somebody point out what i am missing here.
Thanks in Advance
Murthy
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- Help,, Murthy V Gongala
- Re: Help,, PINNI, BALANAND (SBCSI)
- Re: Help,, Jozef Zatko
- Re: Help,,
Jonathan Kaufman <=
- Re: Help,, David Longo
- Re: Help,, Jonathan Kaufman
|
|
|