Re: Library sharing setup problem
2003-04-07 04:42:03
Should be getting all of it from the library manager. We are using this
setup in production, and it is working fine.
-----Oorspronkelijk bericht-----
Van: Jozef Zatko [mailto:zatko AT LOGIN DOT SK]
Verzonden: maandag 7 april 2003 9:52
Aan: ADSM-L AT VM.MARIST DOT EDU
Onderwerp: Re: Library sharing setup problem
According to documentation, on library manager is defined library and
drives as usual (local) with parameter shared=yes in library definition.
On library client, there should be defined library with libtype=shared and
drives and drivepath but without element parameter.
How can library client use drives in shared library if it does not have
drive definition? It get it from library manager?
Thanks for your reply
Ing. Jozef Zatko
Login a.s.
Dlha 2, Stupava
tel.: (421) (2) 60252618
Karel Bos
<Karel.Bos@NU To: ADSM-L AT VM.MARIST DOT EDU
ON.COM> cc:
Sent by: Subject: Re: Library sharing
setup problem
"ADSM: Dist
Stor Manager"
<ADSM-L AT VM DOT MA
RIST.EDU>
07.04.2003
09:41
Please
respond to
"ADSM: Dist
Stor Manager"
In TSM server 5.x you have to define the drives (or rather the drivepaths)
on the library manager and not on the library client. The only definition
you have on the libraryclient is the shared library. All drive definitions
are on the library manager.
Gr,
Karel
-----Oorspronkelijk bericht-----
Van: Jozef Zatko [mailto:zatko AT LOGIN DOT SK]
Verzonden: maandag 7 april 2003 9:06
Aan: ADSM-L AT VM.MARIST DOT EDU
Onderwerp: Library sharing setup problem
Hello TSM-ers,
I have test environment in which I want to setup library sharing. My
environment is as follows:
TSM server 5.1.5.4 on AIX 5.1 connected to SAN
TSM server 5.1.6.2 os Solaris 9 connected to SAN
IBM 3583 LTO library with two LTO drives connected to SAN
On AIX TSM server I defined library and drives as usual.
Then I setup server-to-server communication and both servers are able to
comunicate.
On Solaris server I defined LTO library with libtype=shared and with
primary TSM server which is on AIX.
Now, when I want to define drives for that shared library (according to
manual) I get following error message:
ANR8403E DEFINE DRIVE: Operation not allowed for SHARED libraries.
Did I missed something? What I am doing wrong?
All steps I was doing according to manual.
Thanks
Ing. Jozef Zatko
Login a.s.
Dlha 2, Stupava
tel.: (421) (2) 60252618
|
|
|