StorageTek 9310 tape libraries are only controllable via ACSLS or
LibStation. This is due to the fact that it only supports a TCP/IP (IEEE
802.3, 10baseT, half-duplex), RS423 or 3270 robotic control interface.

- Chris Young

-----Original Message-----
From: Hart, Charles [mailto:charles.hart AT MEDTRONIC DOT COM]
Sent: Wednesday, February 26, 2003 8:09 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: ACSLS or Native TSM manager


Would you still need ACSLS for a 9310 PowderHorn with Fiber attached 9940B
Tape Drives?

Regards,

Charles

-----Original Message-----
From: Prather, Wanda [mailto:Wanda.Prather AT JHUAPL DOT EDU]
Sent: Wednesday, February 26, 2003 1:55 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: ACSLS or Native TSM manager


We run AIX 4.3.3, have gone from TSM 3.1 to 3.7 to 4.1 to 4.2.1.5..... Etc.

On ADSM 3.1, you needed ACSLS to support some types of devices that ADSM
didn't support native.

And at one time you could put two types of drives in the library if you used
ACSLS, and TSM doesn't support that with native SCSI (and I'm not sure you
can still do this at TSM 5.x, even with ACSLS).

Once we evolved past those 2 requirements, we dropped ACSLS and went to
TSM's native SCSI support.
It's a much simpler configuration and works just dandy if TSM is the only
application using the library.


-----Original Message-----
From: Dameon White [mailto:dameon_white AT CHARTER DOT NET]
Sent: Wednesday, February 26, 2003 2:29 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: ACSLS or Native TSM manager


We just bought a used STK L700 with 4 DLT7000 drives.  We
have TSM 5.1.5.2 on AIX and I am confused as to why/if I
would need to use ACSLS to manage the library?  Does ACSLS
provide any features not available with TSM's native
library manager?  We will want to share this L700 with
another TSM server and I can't see why native scsci
library won't be a good choice?

Any advice?

Dameon