Hi,
If Tivoli discovers 'persistent' errors working with a drive, it will take
the drive offline, so it cannot 'accidentally' operate the drive for a
backup action.
I'd check to see if this happens with the same tape - that might indicate
that the tape is bad. I'm no expert on all those errorcodes (there might be
something in one of the manuals), but if the error occurs with another tape,
there's probably something wrong with the drive. If the drive is in a
library, you could check the library's display (if it has one) to seen if
there is something there that might help you determine the exact nature of
the error.
Kind regards,
Rick
-----Oorspronkelijk bericht-----
Van: Sylvia Nergard [mailto:sylvianer AT NO.IBM DOT COM]
Verzonden: 25 februari 2003 12:03
Aan: ADSM-L AT VM.MARIST DOT EDU
Onderwerp: ANR8302E error on drive
Does this indicate a hardware error?
ANR8302E I/O error on drive MT1.0.0.2 (mt1.0.0.2)
(OP=READ, Error Number=1117, CC=305, KEY=00, ASC=00,
ASCQ=00,
SENSE=70.00.00.00.00.00.00.0E.00.00.00.00.00.00-
.00.00.00.00.00.00.00.00., Description=Drive
failure).
Refer to Appendix D in the 'Messages' manual for
recommended action.
ANR8792E Unrecoverable drive failures on drive MT1.0.0.2
(mt1.0.0.2); drive is now taken offline.
This has happend twice, when I set the drive online again it works.
Is it really a hardware error, or could it be something else that makes TSM
to set this drive offline?
Regards
Sylvia Nergård
|