Misleading!
- "q opt" returns what is set in dsmserv.opt not the actual usage, i.e. 32
MB from the initial question;
- "q db f=d" is the correct answer! Have in mind the result is in pages,
not kB or MB.

Zlatko Krastev
IT Consultant






"Miller, Ryan" <Miller.Ryan AT PRINCIPAL DOT COM>
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
17.02.2003 20:02
Please respond to "ADSM: Dist Stor Manager"


        To:     ADSM-L AT VM.MARIST DOT EDU
        cc:
        Subject:        Re: OS390  SELFTUNEBUFPOOLSIZE  yes/no?


You can check the size of your buffer pool by querying your server
options.

q opt

Ryan Miller

Principal Financial Group

Tivoli Certified Consultant
Tivoli Storage Manager v4.1


-----Original Message-----
From: MC Matt Cooper (2838) [mailto:Matt.Cooper AT AMGREETINGS DOT COM]
Sent: Monday, February 17, 2003 9:45 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: OS390 SELFTUNEBUFPOOLSIZE yes/no?


Paul,
        How can I tell what size my BUFPOOLSIZE has grown to?  I know I
start at 32MB but I don't know how much it grows/shrinks.
Matt


 -----Original Message-----
From:   Seay, Paul [mailto:seay_pd AT NAPTHEON DOT COM]
Sent:   Monday, February 17, 2003 10:12 AM
To:     ADSM-L AT VM.MARIST DOT EDU
Subject:        Re: OS390  SELFTUNEBUFPOOLSIZE  yes/no?

I like to set it about 10% higher than the happy point and set it to yes
on
AIX.  Then check it every once and a while to see if it needs adjusting.
The problem is you can create a lot of GETMAINs on MVS if you do not set
it
high enough to begin with.  On MVS, you are probably best to set it to NO
so
that you do not get unpredictable memory usage on the machine.  This is
the
difference between using a dedicated machine for TSM and a general use
machine and needing to share with other workloads.  You have to tune TSM
on
MVS like you would a TP monitor like CICS, IMS, etc.

Paul D. Seay, Jr.
Technical Specialist
Northrop Grumman Information Technology
757-688-8180


-----Original Message-----
From: MC Matt Cooper (2838) [mailto:Matt.Cooper AT AMGREETINGS DOT COM]
Sent: Monday, February 17, 2003 9:28 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: OS390 SELFTUNEBUFPOOLSIZE yes/no?


Hello all,
        I have been reading the dialog on OS/390 performance tuning.  I
too
have found that lowering the size of the address space to 512MB has
helped.
I have also seen improvements in my throughput by cycling TSM.  (I just
don't do it as often.)   One thing that I was wondering is if anyone has
done any research on an advantage to NOT USING SELFTUNBUFPOOLSIZE.  Right
now I set BUFPOOLSIZE to 32760 and SELFTUNEBUFPOOLSIZE yes.   From the
looks
of things TSM seems to be able to cause some thrashing with MVS memory
management.  SO I wonder if SELFTUNEBUFPOOLSIZE should be set to NO and
just
allocate a bigger fixed BUFPOOLSIZE, (like the 128M that was suggested)?
Matt