Hi,
Some notes:
- Diskpool has as nexstg Diskpool2 (should be Filpool1);
- Diskpool2 has no volumes defined in it (est. cap=0) and has no next stg
(should be Filpool2?).
Seems that you have to define volumes in diskpool2 and/or define a next stg.
Gr.
-----Oorspronkelijk bericht-----
Van: murali ramaswamy [mailto:muralirama29 AT HOTMAIL DOT COM]
Verzonden: dinsdag 26 november 2002 17:28
Aan: ADSM-L AT VM.MARIST DOT EDU
Onderwerp: Re: Please help - ANS1311E Server out of data storage space
in TSM
Hi,
q stg gives output as shown at bottom. But still I get
error while backing up (by automatic schedule) as below:
Date/Time: 11/26/2002 10:03:15
Message: ANR0522W Transaction failed for session 9 for node MURALI (WinNT)
- no space available in storage pool
BACKUPPOOL and all successor pools.
Please help for a fix!
thanks
-murali
ANS8000I Server command: 'q stg'
Storage Pool Name: ARCHIVEPOOL
Device Class Name: DISK
Estimated Capacity (MB): 0.0
Pct Util: 0.0
Pct Migr: 0.0
High Mig Pct: 90
Low Mig Pct: 70
Next Storage Pool: DISKPOOL2
Storage Pool Name: BACKUPPOOL
Device Class Name: DISK
Estimated Capacity (MB): 0.0
Pct Util: 0.0
Pct Migr: 0.0
High Mig Pct: 90
Low Mig Pct: 70
Next Storage Pool: DISKPOOL2
Storage Pool Name: DISKPOOL
Device Class Name: DISK
Estimated Capacity (MB): 4.0
Pct Util: 0.1
Pct Migr: 0.0
High Mig Pct: 90
Low Mig Pct: 70
Next Storage Pool: DISKPOOL2
Storage Pool Name: DISKPOOL2
Device Class Name: DISK
Estimated Capacity (MB): 0.0
Pct Util: 0.0
Pct Migr: 0.0
High Mig Pct: 90
Low Mig Pct: 70
Next Storage Pool:
Storage Pool Name: FILPOOL1
Device Class Name: FILEDEV1
Estimated Capacity (MB): 0.0
Pct Util: 0.0
Pct Migr: 0.0
High Mig Pct: 90
Low Mig Pct: 70
Next Storage Pool:
Storage Pool Name: FILPOOL2
Device Class Name: FILEDEV2
Estimated Capacity (MB): 0.0
Pct Util: 0.0
Pct Migr: 0.0
High Mig Pct: 90
Low Mig Pct: 70
more... (<ENTER> to continue, 'C' to cancel)
Next Storage Pool:
Storage Pool Name: SPACEMGPOOL
Device Class Name: DISK
Estimated Capacity (MB): 0.0
Pct Util: 0.0
Pct Migr: 0.0
High Mig Pct: 90
Low Mig Pct: 70
Next Storage Pool:
ANS8002I Highest return code was 0.
>From: Joel Fuhrman <joelf AT CAC.WASHINGTON DOT EDU>
>Reply-To: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
>To: ADSM-L AT VM.MARIST DOT EDU
>Subject: Re: Please help - ANS1311E Server out of data storage space in TSM
>Date: Tue, 19 Nov 2002 17:36:21 -0800
>
>I had this once. I had plenty of scratch tapes, the disk pool was not full,
>we do not use caching so there was no reason for the error. I bounced the
>server and the error went away.
>
>On Tue, 19 Nov 2002, Sias Dealy wrote:
>
> > Murali,
> >
> > Sorry, I am reading too much into your e-mail.
> >
> > I just want to be clear on this.
> > We have a TSM client that is backing up to a TSM server.
> > The backup is failing due to the ANS message about the server
> > out of storage space.
> >
> > Is the data going to a storage pool that is on the disk and
> > then migrated to a tape library?
> >
> > On the TSM server and issue q stg, is there a storage pool that
> > have a %Uil of 100? And if so, is this the disk pool or a tape
> > pool?
> >
> > Sias
> >
> >
> > ---- On Tue, 19 Nov 2002, murali ramaswamy
> > (muralirama29 AT hotmail DOT com) wrote:
> >
> > > Hi,
> > > I am not doing server-server communication. I have server
> > and client on my
> > > machine and a client on another machine in network that I
> > want to backup.
> > > Thanks
> > > - murali
> > >
> > >
> > >
> > >
> > >
> > >
> > > >From: Sias Dealy <hnre AT UREACH DOT COM>
> > > >Reply-To: hnre AT ureach DOT com
> > > >To: ADSM-L AT VM.MARIST DOT EDU
> > > >Subject: Re: Please help - ANS1311E Server out of data
> > storage space in TSM
> > > >Date: Tue, 19 Nov 2002 18:28:23 -0500
> > > >
> > > >Murali,
> > > >
> > > >Are you doing server to server communication?
> > > >If this is the case, the target server may not have enough
> > > >space.
> > > >
> > > >Lower the migration threshold and check the actlog. There
> > > >should be some message about the migration failing and there
> > > >should also be our famous ANS1311E message.
> > > >
> > > >I know that you can add a volume to the target server. The
> > > >command escapes me at the moment. I just don't do server to
> > > >server communcation as often as I would like.
> > > >
> > > >Sias
> > > >
> > > >
> > > >
> > > >
> > > >________________________________________________
> > > >Get your own "800" number
> > > >Voicemail, fax, email, and a lot more
> > > >http://www.ureach.com/reg/tag
> > > >
> > > >
> > > >---- On , murali ramaswamy (muralirama29 AT HOTMAIL DOT COM)
> > wrote:
> > > >
> > > > > Hi,
> > > > > I am not mapping a drive. I added the IP address in the
> > > >field while
> > > > > creating the NODE for the other machine.
> > > > > Thanks
> > > > > -murali
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > >From: Sias Dealy <hnre AT ureach DOT com>
> > > > > >Reply-To: <hnre AT ureach DOT com>
> > > > > >To: "murali ramaswamy" <muralirama29 AT hotmail DOT com>, ADSM-
> > > >L AT VM.MARIST DOT EDU
> > > > > >Subject: Re: Re: Please help - ANS1311E Server out of
> > data
> > > >storage space in
> > > > > >TSM
> > > > > >Date: Tue, 19 Nov 2002 17:38:05 -0500
> > > > > >
> > > > > >
> > > > > >Murali,
> > > > > >
> > > > > >If the data from the disk pool is not going to a tape
> > pool
> > > >but
> > > > > >the data is going to another machine.
> > > > > >I would check the network connection and also if that
> > machine
> > > > > >is up and running. If both checks out fine, then chech
> > to see
> > > > > >if there is enough space on the target machine.
> > > > > >
> > > > > >Are you mapping a drive to another machine? I would
> > unmap and
> > > > > >remap the drive. On Windows 2000 drive mapping is not as
> > > > > >forgiving as NTFS on Unix.
> > > > > >
> > > > > >If everything checks fine.
> > > > > >Lower the migration threshold and check the actlog to see
> > > >what
> > > > > >kind of error message that you are getting.
> > > > > >
> > > > > >A volume is just a file where TSM stores data. I'm not
> > too
> > > >sure
> > > > > >if this would be consider a flat file or not.
> > > > > >
> > > > > >
> > > > > >Sias
> > > > > >
> > > > > >---- On Tue, 19 Nov 2002, murali ramaswamy
> > > > > >(muralirama29 AT hotmail DOT com) wrote:
> > > > > >
> > > > > > > Hi,
> > > > > > > What is volume on Windows 2000 box? I dont have any
> > > >backup
> > > > > >tape drive
> > > > > > > attached. I just back up to another location on the
> > > >machine
> > > > > >which was
> > > > > > > created through the Device Configuration wizard on the
> > > >Server
> > > > > >GUI.
> > > > > > > Thanks
> > > > > > > -murali
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > >From: Sias Dealy <hnre AT UREACH DOT COM>
> > > > > > > >Reply-To: hnre AT ureach DOT com
> > > > > > > >To: ADSM-L AT VM.MARIST DOT EDU
> > > > > > > >Subject: Re: Please help - ANS1311E Server out of
> > data
> > > > > >storage space in TSM
> > > > > > > >Date: Tue, 19 Nov 2002 17:02:13 -0500
> > > > > > > >
> > > > > > > >Murali,
> > > > > > > >
> > > > > > > >To increase the storage pool, need to define a
> > volume to
> > > >that
> > > > > > > >storage pool.
> > > > > > > >
> > > > > > > >define volume <pool name> </path/volume name>
> > > >formatsize=<#>
> > > > > > > >
> > > > > > > >The formatsize value is in megabytes and you only
> > have to
> > > > > >put a
> > > > > > > >number.
> > > > > > > >
> > > > > > > >If you get a message that the diskpool is out of
> > storage,
> > > > > >check
> > > > > > > >the actlog to see if migration started. If migration
> > did
> > > > > >start
> > > > > > > >were there an error message about the tape library.
> > > > > > > >
> > > > > > > >Sias
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >________________________________________________
> > > > > > > >Get your own "800" number
> > > > > > > >Voicemail, fax, email, and a lot more
> > > > > > > >http://www.ureach.com/reg/tag
> > > > > > > >
> > > > > > > >
> > > > > > > >---- On , murali ramaswamy
> > (muralirama29 AT HOTMAIL DOT COM)
> > > > > >wrote:
> > > > > > > >
> > > > > > > > > Hi,
> > > > > > > > > actlog gives following type of message? How do I
> > > > > >increase
> > > > > > > >space
> > > > > > > > > in storage pool? I have 4GB space on my machine
> > and
> > > >how
> > > > > >can
> > > > > > > >it say no
> > > > > > > > > space?
> > > > > > > > >
> > > > > > > > > ANR0522W Transaction failed for session 194 for
> > node
> > > > > > > > > CLONE1 (WinNT) - no space
> > > > > >available in
> > > > > > > >storage pool
> > > > > > > > > BACKUPPOOL and all
> > successor
> > > >pools.
> > > > > > > > > 11/19/2002 13:20:00 ANR0403I Session 194 ended
> > for
> > > >node
> > > > > > > >CLONE1 (WinNT).
> > > > > > > > >
> > > > > > > > > Thanks
> > > > > > > > > -murali
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > >
> > > >
> > >_______________________________________________________________
> > > >_
> > > > > >_
> > > > > > > Add photos to your e-mail with MSN 8. Get 2 months
> > FREE*.
> > > > > > > http://join.msn.com/?page=features/featuredemail
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > > >________________________________________________
> > > > > >Get your own "800" number
> > > > > >Voicemail, fax, email, and a lot more
> > > > > >http://www.ureach.com/reg/tag
> > > > >
> > > > >
> > > > >
> > >
> > >_______________________________________________________________
> > _
> > > >_
> > > > > MSN 8 with e-mail virus protection service: 2 months FREE*
> > > > > http://join.msn.com/?page=features/virus
> > > > >
> > > > >
> > >
> > >
> > >
> > ________________________________________________________________
> > _
> > > MSN 8 with e-mail virus protection service: 2 months FREE*
> > > http://join.msn.com/?page=features/virus
> > >
> > >
> > >
> >
> >
> > ________________________________________________
> > Get your own "800" number
> > Voicemail, fax, email, and a lot more
> > http://www.ureach.com/reg/tag
> >
_________________________________________________________________
MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*.
http://join.msn.com/?page=features/virus
|