Hello All,
I am getting the following error from two of my three drives in the IBM3583
library while trying to verify the label on the tape volume:
ANR8302E I/O error on drive DRIVE3 (mt3.0.0.5) (OP=READ,
Error Number=1117, CC=0, KEY=00, ASC=00, ASCQ=00,
SENSE=70.00.00.00.00.00.00.1C.00.00.00.00.00.00.00.00.00-
.00.00.00.00.01.20.20.20.20.20.20.20.00.00.00.06.9D.03.0-
0.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.-
00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00-
.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.0-
0.00.00.00.00, Description=An undetermined error has
occurred). Refer to Appendix D in the 'Messages' manual
for recommended action.
The library is attached to a Compaq Proliant ML350 running Windows 2000
Advances server via a Compaq 64-Bit/66-Mhz Dual Channel Wide Ultra3 SCSI
Controller which is actually a Adaptec 39160 controller OEM by Compaq. The
two drives were replaced by IBM but that didn't help. I have the latest
firmware on the library and the tape drives.
Anyone have a clue what is going on here?
Thanks
Anwer Adil
LAN Administrator
Columbia University Law School
PH: (212) 854-5611
FX: (212) 854-1749
EM: aadil AT law.columbia DOT edu
|