change the library definition in the devcnfg file.Removed shared=yes

I think you can't share a library when it is defined as manual.

Regards

Raghu.



                    Mario Behring
                    <mariobehring@        To:     ADSM-L AT VM.MARIST DOT EDU
                    YAHOO.COM>            cc:
                    Sent by:              Subject:     Re: restore database 
operation
                    "ADSM: Dist           fail
                    Stor Manager"
                    <ADSM-L AT VM DOT MAR
                    IST.EDU>


                    10/05/2002
                    08:00 AM
                    Please respond
                    to "ADSM: Dist
                    Stor Manager"





Raghu,

Below is the devcnfg.out file I am using. I tried the MANUAL option but
the error persists. Any ideas ??

/* Device Configuration */
DEFINE DEVCLASS 359CLASS1 DEVTYPE=3590 FORMAT=3590E-C MOUNTLIMIT=DRIVES
MOUNTWAIT=60 MOUNTRETENTION=5 PREFIX=ADSM LIBRARY=LB1.1.0.2
SET SERVERNAME MBRA109_Server
DEFINE LIBRARY LB1.1.0.2 LIBTYPE=MANUAL DEVICE=LB1.1.0.2 SHARED=YES
DEFINE DRIVE LB1.1.0.2 MT1.0.0.2 DEVICE=MT1.0.0.2 ONLINE=Yes

Thanks.

Mario Behring




--- Raghu S <raghu AT COSMOS.DCMDS.CO DOT IN> wrote:
> Hi Mario
>
> I too faced similar problem.Try this and let me know it worked or not.
>
> copy the devcnfg file to devcnfg.orig
>
> change the library definition from scsi to manual  in devcnfg file ( def
> library <libname> libtype=manual
>
> define a single drive ( if your library has multiple drives) to the
> library
>
> Load the database volume into the defined drive
> Perform the restore db with the command you mentioned
>
> After sccessfull restoration copy devcnfg.orig to devcnfg
>
> Hope this works
>
> Regards
>
> Raghu S Nivas
> Consultant - TSM
> DCM Data Systems Ltd
> New Delhi
> India.
>
> e-mail: raghu AT cosmos.dcmds.co DOT in,dearaghu AT rediffmail DOT com.
>
>
>
>
>                     Mario Behring
>                     <mariobehring@        To:     ADSM-L AT VM.MARIST DOT EDU
>                     YAHOO.COM>            cc:
>                     Sent by:              Subject:     Re: restore
> database operation
>                     "ADSM: Dist           fail
>                     Stor Manager"
>                     <ADSM-L AT VM DOT MAR
>                     IST.EDU>
>
>
>                     10/04/2002
>                     12:46 PM
>                     Please respond
>                     to "ADSM: Dist
>                     Stor Manager"
>
>
>
>
>
> Avi,
>
> Thank you. The file dsmsrv.opt was not at the ...\server directory. I
> out
> it there and now I have another error:
>
> ========================================================================
> D:\TSM421\server>dsmserv restore db volume=T00039 devclass=359CLASS8
> commit=YES
> ANR0900I Processing options file d:\tsm421\server1\dsmserv.opt.
> ANR7800I DSMSERV generated at 12:09:11 on Aug 29 2001.
>
> Tivoli Storage Manager for Windows NT
> Version 4, Release 2, Level 1.0
>
> Licensed Materials - Property of IBM
>
> 5698-TSM (C) Copyright IBM Corporation 1999,2001. All rights reserved.
> U.S. Government Users Restricted Rights - Use, duplication or disclosure
> restricted by GSA ADP Schedule Contract with IBM Corporation.
>
> ANR8200I TCP/IP driver ready for connection with clients on port 1500.
> ANR0200I Recovery log assigned capacity is 500 megabytes.
> ANR0201I Database assigned capacity is 2048 megabytes.
> ANR8300E I/O error on library LB1.1.0.2 (OP=8401C050, CC=203, KEY=02,
> ASC=04,
> ASCQ=03,
> SENSE=70.00.02.00.00.00.00.58.00.00.00.00.04.03.FF.03.C4.77.01.01.0A.-
>
06.01.00.00.00.00.00.00.00.B8.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.

>
>
>
00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.32.

>
>
> 32.45.20.20.20.20.00.,
> Description=Manual intervention required).  Refer to
> Appendix D in the 'Messages' manual for recommended action.
> ANR9999D admdbbk.c(4294): ThreadId<0> Error 272 creating device class
> 359CLASS8.
> ========================================================================
>
> Please notice that the library is in manual mode and the "TSM Server1"
> service is stopped when I enter the restore db command.
>
> Also, this time I used the wizards to configure the Device Driver and
> there was an error message before the end of the wizard. There was no
> devcnfg.out file created so I used a copy from it from the old TSM
> server.
>
> Thanks.
>
> Mario
>
> --- Avi Langberg <avi_langberg AT IL.IBM DOT COM> wrote:
> > .. Have a look at your Registry  under OPTION, There  is a pointer to
> > the
> > dsmsrv.opt file under your TSM server name, If TSM server doesn't find
> > the dsmsrv.opt he will used a default without  yours devcnfg.out file.
> >
> > Regards,
> >   Avi Langberg
>
>
> __________________________________________________
> Do you Yahoo!?
> New DSL Internet Access from SBC & Yahoo!
> http://sbc.yahoo.com


__________________________________________________
Do you Yahoo!?
Faith Hill - Exclusive Performances, Videos & More
http://faith.yahoo.com