Look at the dsmserv loadformat command - that command makes the db and
log ready for loading.
Andy Carlson |\ _,,,---,,_
Senior Technical Specialist ZZZzz /,`.-'`' -. ;-;;,_
BJC Health Care |,4- ) )-,_. ,\ ( `'-'
St. Louis, Missouri '---''(_/--' `-'\_)
Cat Pics: http://andyc.dyndns.org/animal.html
On Tue, 25 Jun 2002, Anderson, Michael - HMIS wrote:
> I tried to do a unloaddb/loaddb on my test system today. I did the
> following steps
>
> 1) unloaddb (seemed to work ok)
> dsmserv unloaddb devclass=tapeclass
>
> 2) issued dsmserv format command as follows from root directory
> dsmserv format 2 /usr/tivoli/tsm/server/bin/log.dsm
> /tsmstg1/logvol1.dsm 2 /usr/tivoli/tsm/server/bin/db.dsm
> /tsmstg1/db01.dsm (once again seems to work ok)
>
> 3) issue loaddb
> dsmserv loaddb devclass=tapeclass volume=2668b0
>
> I receive the following error anr0982e Server database must
> be initialized before the database can be loaded.
> in the error message book it says to run the dsmserv install,
> however the reference manual says that the
> dsmserv format command replaced the install. So my question is
> what did I do wrong in my format command,
> and why did it look like it worked with no errors? Server
> 4.1.5.3 AIX 4.3.3
>
>
> CONFIDENTIALITY NOTICE: This e-mail message, including any attachments,
> is for the sole use of the intended recipient(s) and may contain
> confidential
> and privileged information. Any unauthorized review, use, disclosure or
> distribution is prohibited. If you are not the intended recipient, please
> contact the sender by reply e-mail and destroy all copies of the original
> message.
>
|