Re: mtlib command
2002-05-20 13:36:46
Geoff,
I'm not where I can check this, but try mtlib -l /dev/lmcp0 -qD -E -f
/dev/rmt6.
-Lloyd
On Mon, 20 May 2002 07:45:57 -0700
On Mon, 20 May 2002 07:45:57 -0700
"Gill, Geoffrey L." <GEOFFREY.L.GILL AT SAIC DOT COM> wrote:
> Good day all,
>
> Somewhere I had documented an mtlib command that could be used to query
> information about the drives attached to the system. With the changeover
of
> TSM servers it's hard to figure out what drive is what. I have
identified a
> few by looking in the side door of the 3494 when a tape got mounted.
> Unfortunately I'll never be able to do this with the rest and have
misplaced
> my mtlib commands.
>
> Can anyone send me the command gives info about the drive itself, as in
> serial number, so I can match rmt(whatever) to it. All I can find is
mtlib
> -l /dev/lmcp0 -qD -f/dev/rmt6, and this one doesn't do it for me. I've
got a
> bad drive and need to locate it this way.
>
> Thanks,
> Geoff Gill
> TSM Administrator
> NT Systems Support Engineer
> SAIC
> E-Mail: <mailto:gillg AT saic DOT com> gillg AT saic DOT com
> Phone: (858) 826-4062
> Pager: (877) 905-7154
>
--
-----------------------------------------------------------------
-----------------------------------------------------------------
Lloyd Dieter - Senior Technology Consultant
Lloyd Dieter - Senior Technology Consultant
Synergy, Inc. http://www.synergyinc.cc ldieter AT snrgy DOT com
Main:716-389-1260 fax:716-389-1267
-----------------------------------------------------------------
=========================================================================
|
|
|