database problem (resolved)
2002-04-19 09:52:37
Hi Everybody,
I solved my problem about TSM database which seems small but occupies big size.
The solution was following:
I create /dev/mt0 device for my 8mm external tape (DO NOT USE things like
/dev/rmt0 like you see on AIX---> lsdev -Cc tape ).
Because people said that manual libraries are defined just in this way (I didnt
know because I see automated ones)
Later I used the following commands:
./dsmserv unloaddb dev=8mmclass scratch=yes
./dsmserv loadformat 1 /adsm/recovery_log/reclog.dsm 3
/adsm/database/datafull1_m /adsm/database/datafull2_m /adsm/database/adsm_db09
./dsmserv loaddb dev=8mmclass vol=mbt2
Now my database is defragmented. And the utiliy I see on "q db" result is just
as
I expected.
Regards,
Burak
|
<Prev in Thread] |
Current Thread |
[Next in Thread> |
- database problem (resolved),
Burak Demircan <=
|
|
|