Yes, it is in the 4.2 doc. Check it out:
http://www.tivoli.com/support/public/Prodman/public_manuals/td/SMAIXN/GC35-0404-01/en_US/HTML/anratfrm.htm
Regards,
Andy
Andy Raibeck
IBM Software Group
Tivoli Storage Manager Client Development
Internal Notes e-mail: Andrew Raibeck/Tucson/IBM@IBMUS
Internet e-mail: storman AT us.ibm DOT com
The only dumb question is the one that goes unasked.
The command line is your friend.
"Good enough" is the enemy of excellence.
John O Neall <jon AT IN2P3 DOT FR>
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
04/03/2002 08:20
Please respond to "ADSM: Dist Stor Manager"
To: ADSM-L AT VM.MARIST DOT EDU
cc:
Subject: Re: dsmadmc displaymode
I only have the 4.1 doc and the list option is not included there. Are
you
sure it is in 4.2?
In any case, thanks. John
Andrew Raibeck wrote:
> I have TSM server version 4.2.1.12, and the help section ends in a
> complete sentence:
>
> ....
> Besides the options listed here, you can also specify any option that is
> in
> the client options file. Each option must be preceded with a hyphen and
> delimited with a space.
>
> tsm: STORMAN_SERVER1>
> ....
>
> Also, the dsmadmc options are documented in the Administrator's
Reference.
>
> Regards,
>
> Andy
>
> Andy Raibeck
> IBM Software Group
> Tivoli Storage Manager Client Development
> Internal Notes e-mail: Andrew Raibeck/Tucson/IBM@IBMUS
> Internet e-mail: storman AT us.ibm DOT com
>
> The only dumb question is the one that goes unasked.
> The command line is your friend.
> "Good enough" is the enemy of excellence.
>
> Michael Bartl <michael.bartl AT CW DOT COM>
> Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
> 04/03/2002 04:23
> Please respond to michael.bartl
>
> To: ADSM-L AT VM.MARIST DOT EDU
> cc:
> Subject: Re: dsmadmc displaymode
>
> John,
> you can get information on the displaymode-option from dsmadmc help 10
> (Using Administrative Client Options). It's just a bit strange, dsmadmc
> ends this help section just within one sentence - we will never find out
> how it ends...
>
> Regards,
> Michael
>
> tsm: >help 10
> Using Administrative Client Options
>
> ------------------------------------------------------------------------
>
> Using Administrative Client Options
>
> In all administrative client modes, the administrative client options
> modify
> your administrative client session responses.
>
> The following administrative client options can be specified with the
> DSMADMC command and are valid from an administrative client session
> only:
>
> -DISPLaymode=LISt or TABle
> Allows you to force the QUERY output to tabular or list format
> regardless of the command line window column width.
>
> If you want the output to go to a file and you are using the
> -DISPLaymode option, use redirection to write to the file. Do not
> use
> the -OUTfile option.
>
> -ID=userid
> Specifies the administrator's user ID.
>
> -PAssword=password
> Specifies the administrator's password.
>
> -NOConfirm
> Specifies that you do not want TSM to request confirmation before
> processing commands that affect the availability of the server or
> data
> managed by the server.
>
> -Quiet
> Specifies that TSM does not display standard output messages to
> your
> screen. However, when you use this option, certain error messages
> still
> appear.
>
> -CONsolemode
> Specifies that TSM runs in console mode. All unsolicited server
> console
> output is echoed to your screen.
>
> -MOUNTmode
> Specifies that TSM runs in mount mode. All server removable-media
> mount
> messages are echoed to your scre en.
>
> -Itemcommit
> Specifies that TSM commits commands inside a script or a macro as
> each
> command is processed.
>
> -OUTfile=filename
> Specifies that output from a server query is redirected to a
> specified
> file. In batch mode, output is redirected to a file you specify and
> the
> format of the output matches the format of the output on your
> screen.
>
> In interactive, console, or mount mode sessions, output displays on
> your screen.
>
> -OUTfile
> Specifies that output from a server query is formatted one line per
> query. This option is available in batch mode only.
>
> -COMMAdelimited
> Specifies that any tabular output from a server query is to be
> formatted as comma-separated strings rather than in readable
> format.
> This option is intended to be used primarily when redirecting the
> output of an SQL query (SELECT command). The comma-separated value
> format is a standard data format which can be processed by many
> common
> programs, including spreadsheets, data bases, and report
> generators.
>
> -TABdelimited
> Specifies that any tabular output from a server query is to be
> formatted as tab-separated strings rather than in readable format.
> This
> option is intended to be used primarily when redirecting the output
> of
> an SQL query (SELECT command). The tab-separated value format is a
> standard data format which can be processed by many common
> programs,
> including spreadsheets, databases, and report generators.
>
> Besides the options listed here, you can also specify any option that is
> in
> the client options file. Each option must be preceded with a hyphen and
>
> tsm: >
>
> John O Neall wrote:
> >
> > Where is the doc on the dsmadmc "displaymode" option?
> >
> > Why is there neither a man nor a -h option on this command? I know it
> > runs on more than Unix, but still...
> >
> > Thanks in advance -- John
> >
> > --
> > ________________________________________________________________
> > | John O'Neall | |
> > | Centre de Calcul de l'IN2P3 | tel: +33 (0)4 78 93 08 80 |
> > | 27 bd du 11 novembre 1918 | fax: +33 (0)4 72 69 41 70 |
> > | 69622 Villeurbanne Cedex |
> > | France |
>
> --
> Michael Bartl, Dipl. Inform. (FH) mailto:michael.bartl AT cw DOT com
> Backup Services, IT Germany/Austria Tel: +49-89-92699-806
> Cable & Wireless Deutschland GmbH. Fax: +49-89-92699-302
> Landsberger Str. 155, D-80687 Muenchen http://www.cw.com/de
--
________________________________________________________________
________________________________________________________________
| John O'Neall | |
| Centre de Calcul de l'IN2P3 | tel: +33 (0)4 78 93 08 80 |
| 27 bd du 11 novembre 1918 | fax: +33 (0)4 72 69 41 70 |
| 69622 Villeurbanne Cedex |
| France |
|