Re: Splitting Library LTO3584
2002-02-07 12:46:11
One TSM server
It looks like I'm able to create sep.device classes and create own
primary/sec. tapepools for fibre drives
This resulted in core dumps and server crash - tape contention issues and
all
Unless, I physical(logical) configure them to recognize as 2 physical medium
changers - it seems like an
impossible task. This is the part i'm looking for help in
> -----Original Message-----
> From: Brown, Bud [SMTP:Bud.Brown AT DHHA DOT ORG]
> Sent: Thursday, February 07, 2002 12:20 PM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Re: Splitting Library LTO3584
>
> We have 2 Tivoli Servers connected to our 3584 library w/ 8 SCSI drives.
> Each server has its own connection to seperated tape drive loops. We
> had to do a Advanced configuration to specify drives and I/O slots. Our
> setup consists of 2 completely seperate TSM servers with their own set
> of domains. Is your setup a single server? If so, the only way I can
> think of making sure that your SAN Clients go directly to the fibre
> drives is to create seperate device class and create their own primary
> and secondary tapepools for the fibre drives. Then create a management
> class that sends data to the pools that are associated with the fibre
> drives. After that you just need to make sure your data is associated
> with the correct management class in your opt or sys file.
>
> Hopefully that helps,
>
> Bud Brown
> Information Services
> Systems Administrator
> Denver Health & Hospitals
>
>
> -----Original Message-----
> From: Selva, Perpetua [mailto:perpetua.selva AT RBCCM DOT COM]
> Sent: Thursday, February 07, 2002 9:51 AM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Re: Splitting Library LTO3584
>
>
> I want them production clients to scsc drives
> and my san project clients to use fibre drives
>
> and allocate production clients no.of slots in the library and the same
> for
> the san clients
>
>
>
> > -----Original Message-----
> > From: Pétur Eyþórsson [SMTP:peddi AT ITN DOT IS]
> > Sent: Thursday, February 07, 2002 11:40 AM
> > To: ADSM-L AT VM.MARIST DOT EDU
> > Subject: Re: Splitting Library LTO3584
> >
> > Are you talking about Library partitioning?
> >
> > Kvedja/Regards
> > Petur Eythorsson
> > Taeknimadur/Technician
> > IBM Certified Specialist - AIX
> > Tivoli Storage Manager Certified Professional
> > Microsoft Certified System Engineer
> >
> > peddi AT itn DOT is
> >
> > Nyherji Hf Simi TEL: +354-569-7700
> > Borgartun 37 105 Iceland
> > URL: http://www.nyherji.is
> >
> >
> > -----Original Message-----
> > From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU]On Behalf
> Of
> > Selva, Perpetua
> > Sent: 7. febrúar 2002 16:24
> > To: ADSM-L AT VM.MARIST DOT EDU
> > Subject: Re: Splitting Library LTO3584
> >
> >
> > Hi
> >
> > Has anyone successfully done a split of the library ?
> >
> > I have a LTO3584 , we have 6 scsi drives for our production
> > environement and we have
> > 2 fibre drives for another project. When attempted to
> configure so
> > that each environments
> > are connecting to the appropriate drives , we failed b/c tapes
> > were
> > mounted on the fibre drives
> > for production clients and vice -versa and eventually server
> core
> > dumping and crashing
> >
> >
> > If some has been successful, pls let me know the steps,
> thanks!
> > >
> **********************************************************************
|
|
|