Hello fellows....

I have  a bit of a problem, the scenario is as follows.

We are running AIX 4.3.3 and have recently moved from ADSM 3.xx to TSM 4.2.
Attached is a IBM 3583 Ultrium tape robot.

The 3583 is working fine and I can do backups.
For my database backups I used the internal 4 mm tape station in ADSM and
thought I'd continue doing that in TSM (or is it better to use the 3583 LTO
robot?). I have defined a device class for the 4mm and a Manual library and
drive. How ever when I try to make a DB backup I get the error below,
insufficient mount points. This worked fine in ADSM before on the same Unix
box.
I cant figure out why.
The 4 mm was installed and defined before the TSM server was installed. Do
I need to remove the device defenition in AIX and redefine it? Or is it
simply an error in my setup?

Anyone have any ideas?

Below is my config.

Error
01/18/02   10:19:29  ANR4571E Database backup/restore terminated -
insufficient
number of mount points available for removable media.

Library;
Library Name: MANUAL_4MM
Library Type: MANUAL
Device:
Private Category:
Scratch Category:
External Manager:
Shared: No
LanFree:
ObeyMountRetention:

Device class;
Device Class Name: MANUAL_DRIVE
Device Access Strategy: Sequential
Storage Pool Count: 0
Device Type: 4MM
Format: DRIVE
Est/Max Capacity (MB):
Mount Limit: 1
Mount Wait (min): 60
Mount Retention (min): 60
Label Prefix: ADSM
Library: MANUAL_4MM
Directory:
Server Name:
Retry Period:
Retry Interval:
Shared:
Last Update by (administrator): ADMIN
Last Update Date/Time: 01/06/02   13:42:05

Drive
Library Name: MANUAL_4MM
Drive Name: MANUAL_TAPE
Device Type: GENERICTAPE
On-Line: Yes
Device: /dev/rmt0
Element:
Allocated to:
Last Update by (administrator): ADMIN
Last Update Date/Time: 01/06/02   13:35:57
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE



Med vänliga hälsningar / Best Regards
Henrik Hansson
Albany Door Systems  AB
Web; www.albanydoorsystems.com