All,

I have installed a new 3583 LTO library and unfortunately Windows is not
see it.  I see the 2 LTO tape drives but the library does not show up at
all.  The 2 drives are connected on the other side of the SCSI bus from
the library too so the bus is terminating properly.

Also, the TSM device driver fails to start.  It says "The system cannot
find the device specified."  The device driver is set to start at boot
and Windows 2000 & Optical Support is enabled.  Also, RSM is disabled.


Windows 2000 SP2
TSM Server 4.2.1.7
IBM Ultrium Tape Driver 5.0.1.11
Adaptec 39160 with the latest drivers


--
Joshua S. Bassi
Joshua S. Bassi
Freelance Consultant & IBM Server/Storage Sales Rep.
IBM Certified - AIX/HACMP, SAN, Shark
Tivoli Certified Consultant- ADSM/TSM
Cell (408)&(831) 332-4006
jbassi AT ihwy DOT com