What about 1580 and 1581, should they be enabled as well?

> -----Original Message-----
> From: Ilja G. Coolen [SMTP:ilja.coolen AT ABP DOT NL]
> Sent: Friday, November 02, 2001 2:18 AM
> To:   ADSM-L AT VM.MARIST DOT EDU
> Subject:      Re: DMZ and ports to be opened?
>
> Hello there Selva,
>
> By default TSM user port 1500 for TCP/IP traffic. So by enabling port 1500
> in the firewall bidirectional for the TSM server and the client node, the
> TSM client and server should be able to communicate. It would be advisable
> to use NAT though.
>
> BE AWARE. TSM port 1500 is default and probabely known by potential
> hackers.
> It could be smart to change the default port.
>
>
> -----Oorspronkelijk bericht-----
> Van: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU]Namens Selva,
> Perpetua
> Verzonden: donderdag 1 november 2001 16:36
> Aan: ADSM-L AT VM.MARIST DOT EDU
> Onderwerp: DMZ and ports to be opened?
> Urgentie: Hoog
>
>
> Hi
>
> Does anyone know how to make this work successfully?
>
> We have opened up a firewall port on the global network, is there anything
> on the TSM ports
> that needs to be opened for backup to be successful?
>
> Please let us know
> Thanks
>
> > -----Original Message-----
> > From: Kyle Kinzer [SMTP:kyle.kinzer AT CO.FAIRFAX.VA DOT US]
> > Sent: Thursday, November 01, 2001 10:31 AM
> > To:   ADSM-L AT VM.MARIST DOT EDU
> > Subject:      Session is lost . . .
> >
> > I had researched the below errors for TSM client on a Novell system a
> > while
> > ago. If I recall, I couldn't find anything specific on the list server,
> > other than it's a TCPIP problem. In my case is was a simple TCPIP
> problem.
> > The NIC card was set to 10mbps/half duplex and the port on the switch
> was
> > set to 10mpbs/full duplex. Once we changed the port to 10mbps/half, the
> > errors went away and backup performed normally.
> >
> > Just thought I'd pass it on.
> >
> > kyle
> >
> >
> > 10/31/2001 12:27:09 TcpRead(): recv(): errno = 54
> > 10/31/2001 12:27:09 sessRecvVerb: Error -50 from call to 'readRtn'.
> > 10/31/2001 12:27:09 ANS1809E Session is lost; initializing session
> reopen
> > procedure.
> > 10/31/2001 12:27:09 ANS1809E Session is lost; initializing session
> reopen
> > procedure.
> > 10/31/2001 12:27:25 ANS1810E TSM session has been reestablished.