I did not show you all the messages i am getting in my event Viewer.
I am also getting these 2 errors repeadedly.
"
A check condition error has occured on device \Device\lb0.0.0.1 during Move
Medium with completion code DD_MEDIA_NOT_EJECTED. Refer to the device's SCSI
reference for appropriate action.
Dump Data: byte 0x3E=KEY, byte 0x3D=ASC, byte 0x3C=ASCQ "
and this one
"The device, \Device\ScsiPort1, did not respond within the timeout period. "
I have tested to replace my SCSI Atapder with no sucess.
> Petur,
>
> I had a similar experience with LVD SCSI cable to a 3584. It turned out to
> be a loose pin or bent pin in the connector. Once we replaced the cable
> everything worked fine. Have your CE checkit it out or try a different
> cable.
>
> Good luck.
>
> George Cardoza
> Sr. IT Specialist
> VIP Ltd., Inc.
>
>
>
>
> -----Original Message-----
> From: Petur Eythorsson [mailto:peddi AT ITN DOT IS]
> Sent: Friday, November 02, 2001 6:18 AM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Repeded I/O Error on drives. HELP!!
>
>
> Hi I have a problem.
>
> I am using TSM Server 4.2.1.4 WIN NT
> I have a Qualstar Library TLS-8433
> I have 2 IBM Ultrium 3580 drives (firmware 16E0)
>
> This is a new library and, we are having repeded I/O Errors witch look like
> this.
>
> "
> 11/01/2001 13:09:33 ANR8302E I/O error on drive LTODRV1 (\\.\TAPE0)
> (OP=READ,
> Error Number=1117, CC=0, KEY=2B, ASC=4B, ASCQ=00,
>
> SENSE=F0.00.2B.00.00.80.00.1C.00.00.00.00.4B.00.00.00.00-
>
> ..00.00.00.00.02.00.00.00.00.00.00.00.0E.00.00.E5.6A.01.0-
> 0, Description=An undetermined error has
> occurred).
> Refer to Appendix D in the 'Messages' manual for
> recommended action.
>
> "
>
> And sometimes this
>
>
> "ANR8302E I/O error on drive LTODRV2 (\\.\TAPE1) (OP=OFFL, Error Number=21,
> CC=0, KEY=00, ASC=00, ASCQ=00,
> SENSE=**NONE**,
> Description=An undetermined error has occurred). Refer to Appendix D in the
> 'Messages' manual for recommended action."
>
> has anyone seen this?
>
> When Space Reclimation starts it can only move about 75-90% of the tape and
> the
> rest it always get a I/O error.
>
>
> I get this error in my event log
>
>
> "The description for Event ID ( 0 ) in Source ( Ultrium ) could not be
> found.
> It contains the following insertion string(s): \Device\Tape1."
>
> I have verified that
>
>
> Dos anyone know what this means?
>
> Please help me!
>
> Petur Eythorsson
> Peddi AT itn DOT is
> Iceland
>
>
>
>
>
>
>
>
>
> -------------------------------------------------------
> ^essi skilabop voru send mep vefpssti Fjarskiptafilagsins Tmtan.
> Slspin er: http://postur.itn.is/
-------------------------------------------------------
^essi skilabop voru send mep vefpssti Fjarskiptafilagsins Tmtan.
^essi skilabop voru send mep vefpssti Fjarskiptafilagsins Tmtan.
Slspin er: http://postur.itn.is/
|
