yes it is correct, and the parameters for the MOVE NODEDATA command will
allow some variations. 
For more details, please see documentation of the presentation Dave Canon
gave in the last Oxford seminar,

yours

>       René Lambelet
>       Nestec S.A. / Informatique du Centre 
>       55, av. Nestlé  CH-1800 Vevey (Switzerland) 
>       *+41'21'924'35'43  7+41'21'924'28'88  * K4-117
>       email rene.lambelet AT nestle DOT com
>       Visit our site: http://www.nestle.com
> 
>               This message is intended only for the use of the addressee
> and 
>         may contain information that is privileged and confidential.
 

>       René Lambelet
>       Nestec S.A. / Informatique du Centre 
>       55, av. Nestlé  CH-1800 Vevey (Switzerland) 
>       *+41'21'924'35'43  7+41'21'924'28'88  * K4-117
>       email rene.lambelet AT nestle DOT com
>       Visit our site: http://www.nestle.com
> 
>               This message is intended only for the use of the addressee
> and 
>         may contain information that is privileged and confidential.
> 
> 
> -----Original Message-----
> From: Robin Sharpe [SMTP:Robin_Sharpe AT BERLEX DOT COM]
> Sent: vendredi, 12. octobre 2001 17:20
> To:   ADSM-L AT VM.MARIST DOT EDU
> Subject:      Re: Restore with 2 or more drives at the same time ???
> 
> Jeff,
> 
> It seems to me your script will move ALL data off of any tape containing
> anything from the specified node, while (I assume) the MOVE NODEDATA
> command will move ONLY that node's data....   Is that correct Rene?
> 
> Robin Sharpe
> Berlex Laboratories
> 
> 
>  
> 
>                     Jeff Bach
> 
>                     <jdbach@WAL-M
> 
>                     ART.COM>      To:    ADSM-L AT VM.MARIST DOT EDU
> 
>                                   cc:    (bcc: Robin Sharpe/WA/USR/SHG)
> 
>                     10/12/01      Subject:
> 
>                     10:55 AM             Re: Restore with 2 or more drives
> at the same time ???                          
>                     Please
> 
>                     respond to
> 
>                     "ADSM: Dist
> 
>                     Stor Manager"
> 
>  
> 
>  
> 
> 
> 
> 
> 
> 
> Does it do any more than this 1 minute script would do?
> 
> 
> dsmadmc -id=  -password= Show volumeusage nodename | grep -I nodename |awk
> '{print $2}' >/tmp/tape.000
> 
> for tape in `cat /tmp/tape.000`
> do
> 
> dsmadmc .......    Move data ${tape} stg=backuppool
> 
> done
> Jeff Bach
> Home Office Open Systems Engineering
> Wal-Mart Stores, Inc.
> 
> WAL-MART CONFIDENTIAL
> 
> 
>         -----Original Message-----
>         From:   Lambelet,Rene,VEVEY,GL-IS/CIS
> [SMTP:Rene.Lambelet AT NESTLE DOT COM]
>         Sent:   Friday, October 12, 2001 9:10 AM
>         To:     ADSM-L AT VM.MARIST DOT EDU
>         Subject:        Re: Restore with 2 or more drives at the same time
> ???
> 
>         Oh I see, apologize, I meant MOVE NODEDATA. With it you can select
> which
>         node and only node you want to move back.
> 
>         René Lambelet
>         Nestec S.A. / Informatique du Centre
>         55, av. Nestlé  CH-1800 Vevey (Switzerland)
>         *+41'21'924'35'43  7+41'21'924'28'88  * K4-117
>         email rene.lambelet AT nestle DOT com
>         Visit our site: http://www.nestle.com
> 
>                 This message is intended only for the use of the addressee
> and
>                 may contain information that is privileged and
> confidential.
> 
> 
> 
>         > -----Original Message-----
>         > From: Zlatko Krastev/ACIT [SMTP:acit AT ATTGLOBAL DOT NET]
>         > Sent: Friday, October 12, 2001 12:28 AM
>         > To:   ADSM-L AT VM.MARIST DOT EDU
>         > Subject:      Re: Restore with 2 or more drives at the same time
> ???
>         >
>         > Why with v5.1? I used MOVE DATA from DLT tape volume to disk
> pool
> without
>         > any problems.
>         > Or MOVE DATA will target resources other than volumes?
>         >
>         > Zlatko Krastev
>         > IT Consultant
>         >
>         >
>         >
>         >
>         >
>         > "Lambelet,Rene,VEVEY,GL-IS/CIS" <Rene.Lambelet AT NESTLE DOT COM> on
> 11.10.2001
>         > 17:50:28
>         > Please respond to "ADSM: Dist Stor Manager"
> <ADSM-L AT VM.MARIST DOT EDU>
>         > To:     ADSM-L AT VM.MARIST DOT EDU
>         > cc:
>         >
>         > Subject:        Re: Restore with 2 or more drives at the same
> time
> ???
>         >
>         > Well, with next version 5.1, you will be able to use MOVE DATA
> to
> bring
>         > your
>         > backup data back from seq. stg pool onto disc stg pools.
>         > And then start multiple sessions, independantly of any tapes,
>         >
>         > René Lambelet
>         > Nestec S.A. / Informatique du Centre
>         > 55, av. Nestlé  CH-1800 Vevey (Switzerland)
>         > *+41'21'924'35'43  7+41'21'924'28'88  * K4-117
>         > email rene.lambelet AT nestle DOT com
>         > Visit our site: http://www.nestle.com
>         >
>         >         This message is intended only for the use of the
> addressee
> and
>         >         may contain information that is privileged and
> confidential.
>         >
>         >
>         >
>         > > -----Original Message-----
>         > > From: Cook, Dwight E (SAIC) [SMTP:cookde AT BP DOT COM]
>         > > Sent: Wednesday, October 10, 2001 6:50 PM
>         > > To:   ADSM-L AT VM.MARIST DOT EDU
>         > > Subject:      Re: Restore with 2 or more drives at the same
> time
> ???
>         > >
>         > > Well, as long as the data is on more than one tape...
>         > > You can fire off multiple dsmc restore processes over on your
> client,
>         > just
>         > > have to break down the requests...
>         > > example, in a unix environment if you have the user
> directories
> JIM BOB
>         > > SUZIE & CARL down under /home you could do
>         > > dsmc restore /home/JIM/*
>         > > dsmc restore /home/BOB/*
>         > > dsmc restore /home/SUZIE/*
>         > > dsmc restore /home/CARL/*
>         > > all in individual window (or nohup them & push them into the
> background)
>         > > same goes for windows type environments but you will have to
> open
>         > multiple
>         > > windows on the machine...
>         > >
>         > > hope this helps...
>         > > Dwight
>         > >
>         > > -----Original Message-----
>         > > From: Claudio Cofre Caro [mailto:ccofre AT SYACHILE DOT CL]
>         > > Sent: Wednesday, October 10, 2001 11:32 AM
>         > > To: ADSM-L AT VM.MARIST DOT EDU
>         > > Subject: Restore with 2 or more drives at the same time ???
>         > >
>         > >
>         > > Hi,
>         > > anyone know how use 2 o more drives at the same time in a
> restore
>         > process
>         > > for only one Node.
>         > >
>         > > We need restore a lot of data for one node in a short time.
>         > >
>         > > Our config is:
>         > >
>         > > - TSM Server 4.1 in AIX 4.3.3
>         > > - Tape Library IBM LTO Ultrium 3583 with 4 drives.
>         > > - TSM Client 4.1 on AIX 4.3
>         > > - No network problem (GigaEthernet configuration)
>         > >
>         > > Thanks in advance...
>         > > -----------------------------------------------
>         > >              Claudio Cofré Caro
>         > >              Ingeniero Especialista de Producto
>         > >              S&A Consultores - Chile
>         > >              e-mail: ccofre AT syachile DOT cl
> 
> 
> **********************************************************************
> This email and any files transmitted with it are confidential
> and intended solely for the individual or entity to
> whom they are addressed.  If you have received this email
> in error destroy it immediately.
> **********************************************************************
>