3494 Tape Library
2001-08-01 14:31:19
I have a 3494 tape library which is connected through a "brocade switch" to
an AIX 4.3.3 server. The tape library is also used by our mainframe.
I was able to define the tape library and drives to the TSM but when I try
to label or read a tape I get the following error message:
ANR8311E An I/O error occurred while accessing drive DRIVE0
(/dev/rmt6) for READ operation, errno = 0.
ANR8810I Volume X10151 has been labeled in library 3494LIB1.
I used 300 for the Private Category and 301 for the Scratch Category.
Library Name: 3494LIB1
Library Type: 349X
Device: /dev/lmcp0
Private Category: 300
Scratch Category: 301
External Manager:
Shared: No
Primary Library Manager:
Last Update by (administrator): MAUROF
Last Update Date/Time: 07/31/2001 18:03:32
Has anyone run into this problem? Any help would be appreciated.
Frank Mauro
Liberty Mutual
Backup and Recovery Services
Frank.MauroJr AT LibertyMutual DOT com
603.245.3207
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- 3494 Tape Library,
Mauro Jr, Frank <=
|
|
|