Hi,
I'm having a the following problem with a 3883 library with three lto
drives:
1)A mount takes more then 300 seconds
2) a "q libv" tells me where my tapes are located, but tsm can't get to
four of the tapes. An "audit libr" tells me that
"ANR8358E Audit operation is required for library MAXIM.
07/24/01 11:28:41 ANR8834E Library volume **UNKNOWN** is still present in
library MAXIM drive LTO1
(/dev/rmt7), and must be removed manually."
This UNKNOWN vol is libv 259aan:
MAXIM 240AAN Private Data 4,126
MAXIM 241AAN Private Data 4,120
MAXIM 242AAN Private Data 4,121
MAXIM 243AAN Private Data 4,122
MAXIM 244AAN Private Data 4,123
MAXIM 245AAN Private Data 4,124
MAXIM 250AAN Private Data 4,104
MAXIM 251AAN Private Data 4,103
MAXIM 252AAN Private Data 4,102
MAXIM 253AAN Private Data 4,107
MAXIM 254AAN Scratch 4,106
MAXIM 255AAN Private Data 4,108
MAXIM 256AAN Private 4,096
MAXIM 257AAN Private Data 4,110
MAXIM 258AAN Private Data 4,109
MAXIM 259AAN Private Data 4,111
I,m running tsm 4.1.3 on aix 4.3.3.(highest patch level) and my 3583
firmware level is V2_50_25.lif (lib) and 16E0.fmr (tapes)
It seems to me that I have an inconsistency between what tsm thinks is in
the robot and what the smc library thinks is in the robot.
Med venlig hilsen / Regards
Henrik Ursin Tlf./Phone +45 35878934
Fax +45 35878990
Email henrik.ursin AT uni-c DOT dk
Mail: UNI-C
DTU, bygning 304
DK-2800 Lyngby
|