Test FTP speeds versus ADSM backups.

On HP: 10.20 use lanadmin -x NMID   to check the interface configuration
HP 11.00 use lanadmin -x PPA to check the interface config.

Make sure the network is configured the same.  Make sure these are no
alignment errors.  Make sure you are not going though a router since they
are 100 MB.

Jeff Bach

> -----Original Message-----
> From: PETER GRIFFIN [SMTP:PETER.GRIFFIN AT SYDNEYWATER.COM DOT AU]
> Sent: Thursday, April 26, 2001 12:01 AM
> To:   ADSM-L AT VM.MARIST DOT EDU
> Subject:      What needs to be done - HP TCP/IP tuning when converting
> from ATM the GB ethernet
>
> The network between a HP client and a SUN server was recently changed from
> ATM to GB ethernet.
>
> Since that conversion the rate of transfer  for the backups has become
> ridiculously slow.
>
> We have yet to prove that the change of network topology is the cause
> though  it is the obvious place to start.
>
> Can anyone offer any suggestions how to check if the IP config on HP  is
> tuned for ATM and what would the appropriate settings for ethernet.
>
> The HP box is a HP 9000 K class
>
> Thanks
>
> Peter Griffin
> Sydney Water


**********************************************************************
This email and any files transmitted with it are confidential
and intended solely for the individual or entity to
whom they are addressed.  If you have received this email
in error destroy it immediately.
**********************************************************************