Yes I see them
Q DEVC:
Device Device Storage Device
Format Est/Max Mount
Class Access Pool Type
Capacity Limit
Name Strategy Count (MB)
--------- ---------- ------- ---------
------ -------- ------
------ -------- ------
LTOCLASS Sequential 0 LTO ULTRIUM
LTOCLASS Sequential 0 LTO ULTRIUM
DRIVES
Q LIBR:
Library Name Library Device
Private Scratch External Shared
Type
Category Category Manager
------------ ---------- ---------------- --------
-------- -------------- ------
LTOLIB SCSI /dev/smc0
LTOLIB SCSI /dev/smc0
No
Q DR:
Library Name Drive Name Device Type
Device ON LINE
------------ ------------ -----------
---------------- -------------------
---------------- -------------------
LTOLIB LTODRV1 LTO
LTOLIB LTODRV1 LTO
/dev/rmt0 Yes
> -----Původní zpráva-----
> Od: Suad Musovich [SMTP:suad AT CCU1.AUCKLAND.AC DOT NZ]
> Odesláno: 18. dubna 2001 12:13
> Komu: ADSM-L AT VM.MARIST DOT EDU
> Předmět: Re: TSM 4.1.3 on AIX and LTO 3583 Library problem
>
> Can you run a "q devc","q libr" and a "q dr" to see how you defined them?
>
> Suad
> --
> On Wed, Apr 18, 2001 at 11:36:10AM +0200, Hrouda Tomá1 wrote:
> > I have trouble with LTO 3583 library and TSM 4.1.3 in AIX 4.3.3.
> >
> > I installed the device driver for 3583 drive and library to AIX system
> (from
> > original install CD) and try to configure it with TSM 4.1.3. In AIX
> system
> > appears this device like /dev/rmt0 (drive) and /dev/smc0 (robot). I
> decide
> > to use it in TSM like automated library (SCSI type) and automated drive
> > (element number for drive set up to 256 according to LTO Setup and
> Operator
> > Guide - this is single slot I/O statin library with one drive (A), so
> that
> > drive element number for drive is 256 (100h) / i think). That I create
> TSM
> > library, drive, deviceclass and link created tape storage pool to it.
> >
> > Now when I use TSM command CHECKIN LIBVOLUME, result was that all
> volumes in
> > library was labelled, but every volume generate message:
> > ANR8311E An I/O error occurred while accessing drive LTODRV1 (/dev/rmt0)
> for
> > READ operation, errno = 5
> > and at the end of process (although its complete status was SUCCESS 6
> > volumes labelled) was message
> > ANR8779E Unable to open drive /dev/rmt0, error number=46
> > Command AUDIT LIBRARY also generate message ANR8311E.
> > I'm not so expiirienced in AIX OS, so that i don't know, why TSM cannot
> > access the drive for read operation although can label tape volume.
> Please
> > try anybody to help me.
> > << Note1: I tried to configure LTO devices like TSM devices through
> SMIT
> > (befor I install atape.driver fot LTO to AIX system), like TSM-SCSI-LIB
> and
> > TSM-SCSI-MT, but without success, there was some error messages, so I
> decide
> > to use device driver for AIX and in TSM use it like SCSI Automated
> library
> > and drive with link to AIX device /dev/rmt0 and /dev/smc0 .... can
> anybody
> > tell me if it was mistake? >>
> > << Note2: I apply TSM 4.1.3 patch for AIX server (IP22261-66)
> succesfully >>
> > Thax much for your help.
> >
> >
> > Tomá1 Hrouda, AGCOM Smioice
> > Tivoli Certified Consultant
> > Storage Manager Specialist
> > hrouda AT agcom DOT cz
> > 049-5941312, 0604-296521
> > ICQ#77892561
> >
> >
> > ---
> > Odchozí zpráva neobsahuje viry.
> > Zkontrolováno antivirovým systémem AVG (http://www.grisoft.cz).
> > Verze: 6.0.225 / Virová báze: 107 - datum vydání: 22.12.2000
> ---
> Příchozí zpráva neobsahuje viry.
> Zkontrolováno antivirovým systémem AVG (http://www.grisoft.cz).
> Verze: 6.0.225 / Virová báze: 107 - datum vydání: 22.12.2000
>
---
Odchozí zpráva neobsahuje viry.
Odchozí zpráva neobsahuje viry.
Zkontrolováno antivirovým systémem AVG (http://www.grisoft.cz).
Verze: 6.0.225 / Virová báze: 107 - datum vydání: 22.12.2000
|
