>We are running tsm 4.1.3 on aix 4.3.3 and a the tapelibrary ibm3494.
>Yesterday I had service on our three tapestation and after that I have
>some problems in defining one of the tapestations. I get the following
>
>ANR8315E DEFINE DRIVE: The device type of drive DRIVE2 is not supported in
>349X libraries.

Henrik - We don't know what device type you have for DRIVE2, but it may
         be the case that the CEs left the drives misconfigured after
performing service.  With 3590 drives you can look at the drive
panel LCD: in the lower left will be the device type that the drive is
configured for.  You could adjust this yourself, I believe, in the
CE Options Menu, under Drv Features; but you may want to have the CEs
come back and correct the problem.  In any case, you can compare the
configuration of the one problem drive with the config of the others
to see what's going on.

  Richard Sims, BU