Hi Dave,
we had just the same error last Monday. We had to repair a damaged tape
drive therefore one drive was removed from the library. After finishing the
repair we got several write errors ANR8302E on all drives.
We completely removed all scsi cables and plugged them back carefuly . After
that all was fine !!
Try it !
> Hans-Peter Hölscher
> Astrium GmbH
> Information Management
> Infrastructure Germany
> SAP R/3 Operations and Database Support
> Abt. AI32
> Tel. +49 421 539 5151
> FAX +49 421 539 28 4036
> email hans-peter.hoelscher AT astrium-space DOT com
>
> -----Ursprüngliche Nachricht-----
> Von: Frost, Dave [mailto:dave.frost AT TELEVAULTIT DOT COM]
> Gesendet: Donnerstag, 22. Februar 2001 15:07
> An: ADSM-L AT VM.MARIST DOT EDU
> Betreff: ait2 firmware level
>
>
> Hi *SMers,
>
> we are running tsm version 3.7.4 on Solaris 7, and Sony ait2
> tape drives in
> an adic scalar 1000.
>
> We are seeing a very large number reposition faults -
> especially with OP=RSR
> - along with a scattering of actual read or write errors,
> spread across 10
> drives and 500 tapes. In one particular case today, we have
> restored the
> tape apparently giving a problem to the diskpool, and then refired the
> restore. Before we had set off the restore, migration had
> moved the files
> back to a new tape. Lo and behold, _exactly_ the same error
> occurred again
> (different drive/different tape).
>
> The error was (again)
> ANR8302E I/O error on drive AIT09 (/dev/rmt/26mt) (OP=RSR,
> CC=205, KEY=FF,
> ASC=FF, ASC=FF, ASCQ=FF, SENSE=**NONE**, Description=SCSI
> adaptor failure).
>
> The drives are paired, and are on 5 distinct chaparral routers.
>
> The firmware level of the drives is x01e7.
>
> TSM support can't find anything in particular.
>
> Has anybody seen this before, or know what the recommendation
> is for this
> combination?
>
> tia
> -=Dave=-
> --
> dave.frost AT televaultit DOT com
>
> ACK and ye shall receive.
>
>
> www.guardianit.com
> The information contained in this email is
> confidential and intended only for the use of the individual
> or entity named above. If the reader of this message is not
> the intended recipient, you are hereby notified that any
> dissemination, distribution, or copying of this communication
> is strictly prohibited. Guardian iT Group will accept no
> responsibility or liability in respect to this email other
> than to the addressee. If you have received this
> communication in error, please notify us immediately via
> email: postmaster AT guardianit DOT com
>
|
