label libvol

Hi all,
 AIX 4.33 , TSM 3.7.4 .
ACSLS 5.3.0 , on  solaris 7.

   loaded  90 DLT`S  into stk9710
    issued command :
 #label libvol stk9710 search=yes status=scratch
tsm: TSM>q proc

 Process Process Description  Status
  Number
-------- -------------------- -------------------------------------------------
      22 LABEL LIBVOLUME      ANR8805I Labelling volumes in library STK9710; 20
      22 LABEL LIBVOLUME      ANR8805I Labelling volumes in library STK9710; 20
                               volumes(s) labelled.

tsm: TSM>q drive

Library Name  Drive Name    Device Type  Device            ON LINE
------------  ------------  -----------  ----------------  -------------------
STK9710       DRIVE0        DLT          /dev/mt0          Yes
STK9710       DRIVE0        DLT          /dev/mt0          Yes
STK9710       DRIVE1        DLT          /dev/mt1          Yes
STK9710       DRIVE2        DLT          /dev/mt2          Yes
STK9710       DRIVE3        DLT          /dev/mt3          Yes
STK9710       DRIVE4        DLT          /dev/mt4          Yes
STK9710       DRIVE5        DLT          /dev/mt5          Yes

tsm: TSM>

ACSLS output :

ACSSA> q dri all
2001-02-08 14:52:49               Drive Status
 Identifier   State           Status      Volume     Type
   0, 0, 2, 0 online          available              DLT7000
   0, 0, 2, 1 online          available              DLT7000
   0, 0, 2, 2 online          available              DLT7000
   0, 0, 2, 3 online          available              DLT7000
   0, 0, 2, 4 online          in use      MED280     DLT7000
   0, 0, 2, 5 online          available              DLT7000
ACSSA>

even though there are 6 drives available TSM is using only one for  labeling and
checkin in volumes ..
how i can tell TSM to use all the drives for labeling and checkin process..


Thanks
Shekhar Dhotre
UNIX/Tivoli Admin .
Bayer Corporation (Diagnostic Division)
Medfiled, MA-02052
shekhar.dhotre.b AT bayer DOT com