ADSM-L

Netware Client abends

2015-10-04 17:25:43
Subject: Netware Client abends
From: David Longo [mailto:David.Longo AT HEALTH-FIRST DOT ORG]
To: ADSM-L AT VM.MARIST DOT EDU
We have the following config:

TSM Server 3.7.4.0 on AIX 4.3.3

Netware Client 4.1.0.0 on Netware 5.0 SP5
Hardware:
IBM Netfinity 7000, model 8651-RM0
768 MB RAM
IBM ServeRAID II, 6 - 9GB HD's, RAID5 w/HS

We Use TCPIP commmethod.

Partial output of VOLUME command:
Mounted Volumes      Name Spaces                                 Flags
SYS                           DOS, LONG
Cp Sa
VOL1                         DOS, MAC, NFS, LONG                 NSS

This client was on 3.7.2.11 of TSM and had the same problem.

Doing an INC backup on a daily prompted schedule it will abend about every
2nd or 3rd day.  Below is one of the Abend log entries.  The abend is always
the same.  I am fairly new here and have started working out existing
problems, like this one.

This Client is working as a file server.  It is backing up VOL1:/users when
it abends.  It appears to always to abend in the S or T area (User names
alphabetically).  At this point it has examined about 400,000 files.

I did a SEL backup with just one users directory that seemd to have a
problem.  It abended after about 7,000 files as follows:
?---------------------------------------------------------------------------
---------------
Normal File  - 10,278,912
Normal File  - 10,278,912
VOL1:/Users/TSANDERS/remdrept/RemedyLinkForPalm/Setup/Remedy/PalmLink/aix/re
mlink.tar [Sent]

(TSA500.NLM  5.3  313) A file cannot be read.

?---------------------------------------------------------------------------
-----
I then did a SEL narrowing directory path smaller and it worked without
I then did a SEL narrowing directory path smaller and it worked without
error.  I did search of Tivoli Knowledge Base on TSA500 and several other
searches and one TSA500 entry was sort of like ours but solution we have
already implemented.

A disk scan has been done by our Netware Admin and had no problem.  We have
other Netware boxes with 3.1 amd 3.7 clients and they work without error.

Anyone have any ideas/suggestions?

ABEND LOG
*******************************************
Server HFIT halted Friday, December 8, 2000  10:54:37 pm
Abend 1 on P00: Server-5.00i: Page Fault Processor Exception (Error code
00000000)
Registers:
Registers:
    CS = 0008 DS = 0010 ES = 0010 FS = 0010 GS = 0010 SS = 0010
    EAX = 00000000 EBX = C83E87D4 ECX = 00000003 EDX = C83E8900
    ESI = C83E894C EDI = 00000000 EBP = C83E87D0 ESP = C83E86C4
    EIP = D17FB830 FLAGS = 00014256
    D17FB830 8B4058         MOV     EAX,[EAX+58]=?
    EIP in FILESYS.NLM at code start +0004B830h
    Access Location: 0x00000058

The violation occurred while processing the following instruction:
D17FB830 8B4058         MOV     EAX,[EAX+58]
D17FB833 81E1FF000000   AND     ECX,000000FF
---------------------------------------------------------------------
End of file. [SYS:SYSTEM\ABEND.LOG]
End of file. [SYS:SYSTEM\ABEND.LOG]
*********************************************************************



David B. Longo
Systems Administrator
Health First, Inc. I/T
3300 Fiske Blvd.
Rockledge, FL 32955-4305
PH      321.434.5536
Pager  321.634.8230
Fax:    321.434.5525
david.longo AT health-first DOT org
<Prev in Thread] Current Thread [Next in Thread>