ADSM-L

Re: Upgrade

2000-11-17 10:03:39
Subject: Re: Upgrade
From: "Prather, Wanda" <Wanda.Prather AT JHUAPL DOT EDU>
Date: Fri, 17 Nov 2000 10:04:40 -0500
THose messages come from a communications problem somewhere between TSM,
ssi, and ACSLS.

*       Make sure that ACSLS is up and you can talk with it via cmd_proc.

*       Then make sure that the ssi and mini-el tasks are up.  Make sure
they can talk with ACSLS by running lbtest.

*       If they are OK, then stop and restart TSM.

*       If you still get those errors, call support.



> -----Original Message-----
> From: Joshua S. Bassi [SMTP:jbassi AT IHWY DOT COM]
> Sent: Thursday, November 16, 2000 5:39 PM
> To:   ADSM-L AT VM.MARIST DOT EDU
> Subject:      Re: Upgrade
>
>
>
> TSM server started but getting following error ..
>
> ANR0916I TIVOLI STORAGE MANAGER distributed by Tivoli is now ready for
> use.
> TSM:TSM>
>
> 11-16-00 17:14:32 none[0]:
> cl_ipc_write: Sending message to socket 50004 failed on "Error 0"
> 11-16-00 17:14:52 none[0]:
> cl_inform: Sending message to socket 50004 failed on "Error 0"
> 11-16-00 17:15:02 none[0]:
> acs_ipc_write: FATAL_ERROR! cl_ipc_write() failed.
>
>
> 11-16-00 17:15:12 none[0]:
> acs_ipc_write: FATAL_ERROR! cl_ipc_write() failed.
>
>
>
>
>
> "DDA.RFC-822=ADSM-L AT VM.MARIST DOT EDU/P=Internet/A= /C=us" on 11/16/2000
> 05:18:27 PM
> Please respond to "DDA.RFC-822=ADSM-L AT VM.MARIST DOT EDU/P=Internet/A= 
> /C=us" @
> X400
> To: "DDA.RFC-822=ADSM-L AT VM.MARIST DOT EDU/P=Internet/A= /C=us"@X400
> cc:
>
> Subject: Re: Upgrade
>
> Issue# dsmserv upgradedb
>
>
> --
> Joshua S. Bassi
> IBM Certified- AIX Support, HACMP, SAN
> Enterprise Disk(Shark)& Tape Solutions
> Tivoli Certified Consultant - ADSM/TSM
> jbassi AT ihwy DOT com
>
> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU]On Behalf Of
> Shekhar Dhotre
> Sent: Thursday, November 16, 2000 2:00 PM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Upgrade
>
>
> Hi all i just applied patch for Tivoli Storage manager .
> to upgrade from 3.7.2 to 3.7.4  , and tried to restart the server
> gives following error.  where and how i should use  UPGRADEDB  command?
>
> # dsmserv
> ANR7800I DSMSERV generated at 09:50:09 on Oct 17 2000.
>
> Tivoli Storage Manager for AIX-RS/6000
> Version 3, Release 7, Level 4.0
>
> Licensed Materials - Property of IBM
>
> 5697-TSM (C) Copyright IBM Corporation 1999. All rights reserved.
> U.S. Government Users Restricted Rights - Use, duplication or disclosure
> restricted by GSA ADP Schedule Contract with IBM Corporation.
>
> ANR0900I Processing options file dsmserv.opt.
> ANR0990I Server restart-recovery in progress.
> ANR0200I Recovery log assigned capacity is 1100 megabytes.
> ANR0201I Database assigned capacity is 500 megabytes.
> ANR0306I Recovery log volume mount in progress.
> ANR0983W The server database was recorded by a down-level version of the
> server
> program. The UPGRADEDB parameter is required to start the server and
> automatically upgrade the database contents to the current server version.
> Please refer to installation instructions for precautionary backup
> procedures
> prior to doing this.
<Prev in Thread] Current Thread [Next in Thread>