You're trying to use a 32 bit driver under a 64 bit OS.

Before 3.7.3 there were no 64 bit drivers. Try upgrading your server to
3.7.3 or above and it should work okay.

On Wed, Aug 09, 2000 at 04:26:51PM +1000, Gogos, Michael wrote:
> Hello,
> I also have the same problem.  TSM 3.7, Solaris 2.7 on part of an E10000,
> the library is a Sun StorEdge L1000.
> I've edited the /usr/kernel/drv/mt.conf for the two drives (SCSI id 2, LUN 0
> & SCSI id 3, LUN 0) and also /usr/kernel/drv/lb.conf for the library (SCSI
> id 0, LUN 0).  add_drv for both mt and lb fail with the same message as
> Boris.
> I'm new to both Sun and TSM, so I'd appreciate any help, even something that
> may seem blatantly obvious to some of you.
>
>
> ____________________________
> Michael Gogos
> Unix Systems Support
> ANZ Banking Group
> 227 Toorak Road
> South Yarra 3141
> Victoria, Australia
> phone: (+613) 9869-6840
> fax: (+613) 9869-3447
> email: mailto:gogosm AT anz DOT com
> ____________________________
>
>
> -----Original Message-----
> From: Boris Feldman (Udi) [mailto:boris AT UDI.CO DOT IL]
> Sent: Wednesday, August 09, 2000 4:54 PM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: TSM 3.7 Sun Sol Server error
>
>
> Hi All,
>
> We are using TSM 3.7 Server on Sun Solaris server (Ultra 60) with AIT2 tapes
> in QualStar 4440 library.
> I got the failed installation process (on the mt drive definition point :
> add_drv ).
> The error was : the mt drive was successfully added to system but failed to
> attach.
> As result of this problem we have not the mt driver files in /dev/rmt/
> directory.
> Any ideas?
>
> TNXS.
> _______________________________
> Boris Feldman - Product Manager
> IBM Storage & TSM
> UDI Millenium Ltd.
> 1G Yoni Netanyahu Str.
> Or-Yehuda 60256, ISRAEL
> Tel : (972)-3-5333555 ext. 357
> Fax : (972)-3-5333676
> Mobile : (972)-54-929357
> E-mail boris AT udi.co DOT il <mailto:motyr AT adanet.co DOT il>
> _______________________________