TSM doesn't handle the robot management, you have to have acsls.

> -----Original Message-----
> From: Peter Pijpelink [SMTP:peterp AT KABELFOON DOT NL]
> Sent: Thursday, July 27, 2000 2:57 PM
> To:   ADSM-L AT VM.MARIST DOT EDU
> Subject:
>
> Hi, If i have :
>
>   Tivoli Storage Manager (3.7.3.0) for AIX 4.3.3 HBA: Emulex LP8000
> StorageTek StorageNet 3100/3200 (=Crossroads
>   4100) Drives : STK 9840 FC library: STK L180 (2x) Library: STK L700 (1x)
> Fibre-Channel Hubs: StorageTek
>   StorageNet 1000 (Vixel Rapport 1000)
>
>   Do i need drivers for AIX? or Do i need to use acsls ??
>
>   Storagtek can not help me with this question. Any help welcome.
>
>   I have several problem when i want to define a drive trough Smit.
>
>   This is the emulux stat
>
>   # lscfg -vl fchan0
>     DEVICE            LOCATION          DESCRIPTION
>
>     fchan0            20-58             PCI Fibre Channel Adapter
>
>           Network Address.............0000C922BA02
>           EC Level....................DRAGONFLY 2
>           Part Number.................LP8000
>           Displayable Message.........Fibre Channel Host Adapter
>           Loadable Microcode Level....3025801
>           Diagnostic Level............1112000
>           Manufacturer................EMULEX
>           Device Specific.(YL)........U1.0-P1-I3
>
>   This is the lslpp of the used driver (running BULL AIX!)
>
>   # lslpp -l |grep df1
>     devices.pci.df1000f7.com  4.3.3.11  COMMITTED  Common PCI FC Adapter
> Device
>     devices.pci.df1000f7.diag
>     devices.pci.df1000f7.rte   4.3.3.0  COMMITTED  PCI FC Adapter Device
> Software
>     devices.pci.df1001f7.diag  1.3.3.0  COMMITTED  Fibre Channel SCSI LAN
> I/O
>     devices.pci.df1001f7.rte   1.3.3.3  COMMITTED  Fibre Channel SCSI LAN
> Adapter
>     devices.pci.df1001f7.ucode
>     devices.pci.df1001f8.diag  1.3.3.0  COMMITTED  Fibre Channel SCSI LAN
> I/O
>     devices.pci.df1001f8.rte   1.3.3.2  COMMITTED  Fibre Channel SCSI LAN
> Adapter
>     devices.pci.df1001f8.ucode
>     devices.pci.df10e51a.diag  1.3.3.5  COMMITTED  Fibre Channel SCSI LAN
> I/O
>     devices.pci.df10e51a.rte  1.3.3.15  COMMITTED  Fibre Channel SCSI LAN
> Adapter
>     devices.pci.df10e51a.ucode
>     devices.pci.df1000f7.com   4.3.3.0  COMMITTED  Common PCI FC Adapter
> Device
>     devices.pci.df1000f7.rte   4.3.3.0  COMMITTED  PCI FC Adapter Device
> Software
>     devices.pci.df1001f7.rte   1.3.3.0  COMMITTED  Fibre Channel SCSI LAN
> Adapter
>     devices.pci.df1001f8.rte   1.3.3.0  COMMITTED  Fibre Channel SCSI LAN
> Adapter
>     devices.pci.df10e51a.rte   1.3.3.0  COMMITTED  Fibre Channel SCSI LAN
> Adapter
>
>   And this is my lsdev -C
>
>   fchan0 Available 20-58 PCI Fibre Channel Adapter fcp0 Available 20-58-00
> Fibre Channel FCP Interface fcp1 Available
>   20-58-3E Fibre Channel FCP Interface fcp2 Available 20-58-3F Fibre
> Channel FCP Interface fcp3 Available 20-58-3G
>   Fibre Channel FCP Interface fcp4 Available 20-58-3H Fibre Channel FCP
> Interface
>
>   I can not communicate with the drives or the library.
>
>   What am i doing wrong?
>
>   regards
>
>   Peter