Hi, If i have :

 Tivoli Storage Manager (3.7.3.0) for AIX 4.3.3 HBA: Emulex LP8000
StorageTek StorageNet 3100/3200 (=Crossroads
 4100) Drives : STK 9840 FC library: STK L180 (2x) Library: STK L700 (1x)
Fibre-Channel Hubs: StorageTek
 StorageNet 1000 (Vixel Rapport 1000)

 Do i need drivers for AIX? or Do i need to use acsls ??

 Storagtek can not help me with this question. Any help welcome.

 I have several problem when i want to define a drive trough Smit.

 This is the emulux stat

 # lscfg -vl fchan0
   DEVICE            LOCATION          DESCRIPTION

   fchan0            20-58             PCI Fibre Channel Adapter

         Network Address.............0000C922BA02
         EC Level....................DRAGONFLY 2
         Part Number.................LP8000
         Displayable Message.........Fibre Channel Host Adapter
         Loadable Microcode Level....3025801
         Diagnostic Level............1112000
         Manufacturer................EMULEX
         Device Specific.(YL)........U1.0-P1-I3

 This is the lslpp of the used driver (running BULL AIX!)

 # lslpp -l |grep df1
   devices.pci.df1000f7.com  4.3.3.11  COMMITTED  Common PCI FC Adapter Device
   devices.pci.df1000f7.diag
   devices.pci.df1000f7.rte   4.3.3.0  COMMITTED  PCI FC Adapter Device
Software
   devices.pci.df1001f7.diag  1.3.3.0  COMMITTED  Fibre Channel SCSI LAN I/O
   devices.pci.df1001f7.rte   1.3.3.3  COMMITTED  Fibre Channel SCSI LAN
Adapter
   devices.pci.df1001f7.ucode
   devices.pci.df1001f8.diag  1.3.3.0  COMMITTED  Fibre Channel SCSI LAN I/O
   devices.pci.df1001f8.rte   1.3.3.2  COMMITTED  Fibre Channel SCSI LAN
Adapter
   devices.pci.df1001f8.ucode
   devices.pci.df10e51a.diag  1.3.3.5  COMMITTED  Fibre Channel SCSI LAN I/O
   devices.pci.df10e51a.rte  1.3.3.15  COMMITTED  Fibre Channel SCSI LAN
Adapter
   devices.pci.df10e51a.ucode
   devices.pci.df1000f7.com   4.3.3.0  COMMITTED  Common PCI FC Adapter Device
   devices.pci.df1000f7.rte   4.3.3.0  COMMITTED  PCI FC Adapter Device
Software
   devices.pci.df1001f7.rte   1.3.3.0  COMMITTED  Fibre Channel SCSI LAN
Adapter
   devices.pci.df1001f8.rte   1.3.3.0  COMMITTED  Fibre Channel SCSI LAN
Adapter
   devices.pci.df10e51a.rte   1.3.3.0  COMMITTED  Fibre Channel SCSI LAN
Adapter

 And this is my lsdev -C

 fchan0 Available 20-58 PCI Fibre Channel Adapter fcp0 Available 20-58-00
Fibre Channel FCP Interface fcp1 Available
 20-58-3E Fibre Channel FCP Interface fcp2 Available 20-58-3F Fibre
Channel FCP Interface fcp3 Available 20-58-3G
 Fibre Channel FCP Interface fcp4 Available 20-58-3H Fibre Channel FCP
Interface

 I can not communicate with the drives or the library.

 What am i doing wrong?

 regards

 Peter