Mark,
As you requested The DSM.OPT is as follows :
It's the same on all servers excepting the node name.
Mike
===========================================================================
==================
************************************************************************
* ADSTAR Distributed Storage Manager
*
* Sample client options file for ADSM Novell NetWare client
************************************************************************
*********************************************************************
* Copy DSM.SMP (this file) to DSM.OPT.
*
* To specify the communication method used between the client node
* and server. Select one of the following communication methods
* by removing the '*'. Fill in NODENAME and this will represent a
* minimum set of options to get started.
*
* You may also exclude some operating system files. A recommended
* list is at the bottom of this file. These files typically are
* system level files that, even if backed up, could not be properly
* restored. If they are restored, they could corrupt the operation
* of the system. If you decide to use the list, simply remove the
* '*'.
*
* (for the communication method values, you may have to
* contact your system administrator)
*********************************************************************
* Communications settings
* -------------------------------------------------------
* Setting Options for the SNA LU 6.2 Communication Method
* -------------------------------------------------------
* COMMMETHOD SNAlu6.2
* SYMBOLICDESTINATION server
* Setting Options for the TCP/IP Communication Method
* -------------------------------------------------------
*
COMMMETHOD TCPip
TCPSERVERADDRESS 172.17.253.21
TCPPORT 1500
* Setting Options for the IPX/SPX Communication Method
* -------------------------------------------------------
*
* COMMMETHOD IPXSPX
* IPXSERVERADDRESS ipx_address
* IPXSOCKET ipx_socket
* Setting Options for the PWSCS Communication Method
* -------------------------------------------------------
* COMMMETHOD PWScs
* SYMBOLICDESTINATION server
*
* COMMMETHOD PWSCS
* TPNAME server
* PARTNERLUNAME target_lu
* CPICMODENAME session_of_target_lu
* CPICBUFFERSIZE 15
* Setting Nodename
* -------------------------------------------------------
NODENAME GIS
*
* Recommended exclude list for NetWare
* -------------------------------------------------------
*
* NetWare 3.x specific - use the INCR BINDERY or SEL BINDERY
* command to backup the bindery; exclude the real bindery
* files:
* -------------------------------------------------------
* EXCLUDE sys:\system\net$obj.sys
* EXCLUDE sys:\system\net$prop.sys
* EXCLUDE sys:\system\net$val.sys
*
* NetWare 4.x specific - NDS leaf objects can be included/
* excluded; container objects are not affected. This example
* shows how to include only objects in container
* .OU=Development.O=ADSM
* ---------------------------------------------------------
* EXCLUDE directory:/.O=ADSM/.../*
* INCLUDE directory:/.O=ADSM/.OU=Development.O=ADSM/.../*
INCLUDE directory:/.O=IAA/.../*
*
* NetWare general excludes
* ---------------------------------------------------------
EXCLUDE sys:\system\secaudit.log
EXCLUDE sys:\system\events.log
EXCLUDE sys:\system\system.log
EXCLUDE sys:\system\btrieve.trn
EXCLUDE sys:\system\tsa\tsa$temp.*
EXCLUDE sys:\system\sys$log.err
EXCLUDE sys:\vol$log.err
EXCLUDE sys:\tts$log.err
EXCLUDE SYS:\QUEUES\*\*.SRV
EXCLUDE SYS:\QUEUES\*\*.SYS
* NetWare Screen option
* ---------------------------------------------------------------
* The following option instructs the NetWare client to destroy
* the ADSM screen when quitting the dsmc program.
*
NWWAIT NO
* NetWare user ID and password option
* --------------------------------------------------------------
* The following option specifies a user ID and password to connect
* to a local or remote NetWare resource (server or NDS tree). The
* user ID must have NetWare supervisory equivalence. Use this
* option for each resource which will be managed by ADSM.
*
* If this option is not specified in the client options file, ADSM
* will check for a user ID and password in an encrypted file (if
* NWPWFILE is set to YES). If a correct user ID and password
* is not found in a file (or NWPWFILE is set to NO), ADSM will prompt
* for a user ID and password when a backup or archive operation
* is initiated.
*
* NWUSER server_1_name\user:password
* NWUSER server_2_name\user:password
* NWUSER nds_tree_name\user:password
* NWUSER NS_IAA_GIS\admin:reshet
* NetWare user ID and password file
* --------------------------------------------------------------
* The following option specifies that the user ID and password used
* to connect to a NetWare resource (server or NDS tree) will be stored
* in an encrypted file in the installation directory after the intiial
* prompt. An encrypted file will be created for each resource with the
* extension .PWD
*
PASSWORDACCESS GENERATE
NWPWFILE YES
* Silencing screen output
* -----------------------------------------------------------------
* Use the QUIET option to keep messages from being displayed on the
* NetWare console and the schedule log file. This option will enhance
* the performance during scheduled backups.
*
* Note that by using this option, schedule event windows, schedule
* statistics and errors during schedule processing will still be
* written to the schedule log file.
*
* If this option is not specified, the default VERBOSE will be taken.
*
* QUIET
* Communication Paramaters
*--------------------------------------------------------------------
TCPBUFFSIZE 31
TCPWINDOWSIZE 48
TXNBYTELIMIT 2048
SCHEDLOGname V_VOL1:/ADSMLOG/dsmsched.log
ERRORLOGname V_VOL1:/ADSMLOG/error.log
SCHEDLOGretention 6 D
SCROLLPrompt YES
SCROLLLines 20
COMPression NO
LARGECOMMBUFFERS YES
MEMORYEFFICIENTBACKUP NO
===========================================================================
==================
> -----Original Message-----
> From: Remeta, Mark [SMTP:MRemeta AT SELIGMANDATA DOT COM]
> Sent: ? ??? 27 2000 15:18
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Re: Netware backup problems on some servers running ADSM
> client V er 3 , Release 1, Level 0.8
>
> Mike, why don't you post your dsm.opt file too.
>
> thanks,
> Mark
>
>
> -----Original Message-----
> From: Mike Glassman - Admin [mailto:admin AT IAA.GOV DOT IL]
> Sent: Sunday, March 26, 2000 5:17 AM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Netware backup problems on some servers running ADSM client Ver
> 3 , Release 1, Level 0.8
>
>
> Hi all,
>
> Sending this a second time, as I didn't get and replies on the first.
>
> I am having some trouble on some of my Netware 5.0 servers when attempting
> to run a Scheduled backup of the server with the above client.
>
> When running the scheduled backup, I end up with an error 4, and when
> looking in the logs, I see that I have no rights to backup the server
> specific info, or the volumes.
>
> The very strange thing is that if I run a manuall INC command using :
>
> Load DSMC INC -SUB=YES SYS: V_VOL1: V_VOL2:
>
> on the same server, I manage to backup fine with no errors at all.
>
> The command that I use to run the Scheduled backup is a simple :
>
> Load DSMC SCHED -pass=gis
>
> All servers also run the web based NLM - DSMCAD.NLM which is loaded one
> line
> after the SCHED command line.
>
> All servers load TSA500 and TSANDS prior to running the schedule command
> for
> backup.
>
> All servers have 128MB RAM.
>
> This started about 2 weeks ago, and occurs on 5 out of 13 servers. All
> servers run the same SCHED command line, (but with different -pass= names
> of
> course), and all have the same scheduler set up at 10 minute intervals.
>
> Our ADSM server is an AS400 running Server Version 3, Release 1, Level
> 1.7.
>
> I would appreciate any and all assistance with this as I am at wits end
> already.
>
> The errors that appear in the log ar as follows :
>
> 03/19/2000 14:49:16 --- SCHEDULEREC QUERY BEGIN
> 03/19/2000 14:49:16 --- SCHEDULEREC QUERY END
> 03/19/2000 14:49:16 Next operation scheduled:
> 03/19/2000 14:49:16
> ------------------------------------------------------------
> 03/19/2000 14:49:16 Schedule Name: GIS
> 03/19/2000 14:49:16 Action: Incremental
> 03/19/2000 14:49:16 Objects:
> 03/19/2000 14:49:16 Options:
> 03/19/2000 14:49:16 Server Window Start: 21:45:00 on 03/19/2000
> 03/19/2000 14:49:16
> ------------------------------------------------------------
> 03/19/2000 14:49:16 Command will be executed in 7 hours and 9 minutes.
> 03/19/2000 14:49:16
> Time remaining until execution:
> Executing scheduled command now.
> 03/19/2000 21:58:16 Node Name: GIS
> 03/19/2000 21:58:17 Session established with server ADSM_SYSTEM2: AS400
> 03/19/2000 21:58:17 Server Version 3, Release 1, Level 1.7
> 03/19/2000 21:58:17 Server date/time: 03/19/2000 21:56:33 Last access:
> 03/19/2000 14:47:33
>
> 03/19/2000 21:58:17 --- SCHEDULEREC OBJECT BEGIN GIS 03/19/2000 21:45:00
> 03/19/2000 21:58:26
> Connecting to a NetWare File System (NS_IAA_GIS).
>
> 03/19/2000 21:58:26
> Connected to NS_IAA_GIS.
>
> 03/19/2000 21:58:35
> Connecting to a Novell Directory (T_IAA).
>
> 03/19/2000 21:58:35
> Connected to T_IAA.
>
> 03/19/2000 21:58:35 Incremental backup of volume 'NS_IAA_GIS\SERVER
> SPECIFIC
> INFO'
> 03/19/2000 21:58:35 Normal File--> 1,048,576 Server Specific
> Info/Server Specific Info ** Unsuccessful **
> 03/19/2000 21:58:36 ANS1228E Sending of object 'Server Specific
> Info/Server
> Specific Info' failed
> 03/19/2000 21:58:36 ANS4007E Error processing 'Server Specific Info/Server
> Specific Info': access to the object is denied
> 03/19/2000 21:58:36 ANS1802E Incremental backup of 'NS_IAA_GIS\SERVER
> SPECIFIC INFO' finished with 1 failure
>
> 03/19/2000 21:58:36 Incremental backup of volume 'NS_IAA_GIS\SYS:'
> 03/19/2000 21:58:36 ANS1087E Access to the specified file or directory is
> denied
> 03/19/2000 21:58:36 Incremental backup of volume 'NS_IAA_GIS\V_VOL1:'
> 03/19/2000 21:58:36 ANS1087E Access to the specified file or directory is
> denied
> 03/19/2000 21:58:36 Incremental backup of volume 'NS_IAA_GIS\V_VOL2:'
> 03/19/2000 21:58:36 ANS1087E Access to the specified file or directory is
> denied
> 03/19/2000 21:58:36 --- SCHEDULEREC OBJECT END GIS 03/19/2000 21:45:00
> 03/19/2000 21:58:36 --- SCHEDULEREC STATUS BEGIN GIS 03/19/2000 21:45:00
> 03/19/2000 21:58:36 Total number of objects inspected: 1
> 03/19/2000 21:58:36 Total number of objects backed up: 0
> 03/19/2000 21:58:36 Total number of objects updated: 0
> 03/19/2000 21:58:36 Total number of objects rebound: 0
> 03/19/2000 21:58:36 Total number of objects deleted: 0
> 03/19/2000 21:58:36 Total number of objects failed: 1
> 03/19/2000 21:58:36 Total number of bytes transferred: 0
> 03/19/2000 21:58:36 Data transfer time: 0.00 sec
> 03/19/2000 21:58:36 Network data transfer rate: 0.00 KB/sec
> 03/19/2000 21:58:36 Aggregate data transfer rate: 0.00 KB/sec
> 03/19/2000 21:58:36 Objects compressed by: 0%
> 03/19/2000 21:58:36 Elapsed processing time: 00:00:18
> 03/19/2000 21:58:36 --- SCHEDULEREC STATUS END GIS 03/19/2000 21:45:00
> 03/19/2000 21:58:36 ANS1512E Scheduled event 'GIS' failed. Return code =
> 4.
> 03/19/2000 21:58:36 Sending results for scheduled event 'GIS'.
> 03/19/2000 21:58:36 Results sent to server for scheduled event 'GIS'.
>
> 03/19/2000 21:58:37 ANS1483I Schedule log pruning started.
> 03/19/2000 21:58:37 Schedule Log Prune: 916 lines processed. 90 lines
> pruned.
> 03/19/2000 21:58:37 ANS1484I Schedule log pruning finished successfully.
> 03/19/2000 21:58:37 Querying server for next scheduled event.
> 03/19/2000 21:58:37 Node Name: GIS
> 03/19/2000 21:58:37 Session established with server ADSM_SYSTEM2: AS400
> 03/19/2000 21:58:37 Server Version 3, Release 1, Level 1.7
> 03/19/2000 21:58:37 Server date/time: 03/19/2000 21:56:53 Last access:
> 03/19/2000 21:56:33
>
>
>
> Mike Glassman
> System & Security Admin
> Israeli Airports Authority
> Ben-Gurion Airport
> http://www.ben-gurion-airport.co.il
>
> Tel : 972-3-9710785
> Fax : 972-3-9710939
> Email : admin AT iaa.gov DOT il
>
> Usage of this email address or any email address at iaa.gov.il for the
> purpose of sales pitches, SPAM or any other such unwanted garbage, is
> illegal, and any person, whether corporate or alone doing so, will be
> prosecuted to the fullest possible extent.
|