There isn't such a thing like "teach" on 3575 library. You actually need
a CE that does something like that with manual intervention. The final
goal is actually the same.
Mauro, STM
> By re-calibrated, do you mean a 'teach'? Because in the middle of all
of
> this, the new frame we had ordered arrived, and we installed it, doing
a
> complete 'teach' in the process....
>
> On Wed, 23 Feb 2000, Larry Way wrote:
>
> // Had a similiar problem only on a 3575 library with 35750 drives.
Problem wor
> ked out to be with robot. Needed to be recalibrated ...
> //
> // Larry Way
> // SL09/100D
> // 408-743-4242 voice
> // 408-743-4201 fax
> //
> // >>> bth AT CLARKSON DOT EDU 02/22/00 01:12PM >>>
> // Hi everyone...
> // I and my IBM CE have been pulling our hair out on this one for
almost a
> // week...
> //
> // Whenever my 3494lib w/ 2x 3590 B1A drives mounts a tape (to do a
> // migration, for example), it shortly produces a WRITE error
(errorno=78),
> // and marks the tape 'read-only'. I'm running ADSM 3.1.2.40 on an H70
> // running AIX 4.3.2 The atape, atldd, and 3590 microcode are to
current
> // levels.
> //
> // This problem started as intermittent on one drive, and now has
progressed
> // to the point where I can't write anything to tape anymore on either
drive.
> //
> // We have tried replacing the 18m SCSI cables, re-routing the SCSI
cables,
> // replacing both SCSI adapters, both terminators, and both 3590 card
packs,
> // all with no change in results.
> //
> // IBM hardware support says it's a software problem, ADSM support says
it's
> // a hardware problem... Anyone have any ideas? I'm sweating big time
> // because I'll run out of disk space upon which to do my backups soon
> // if I can't move the data off to tape! :-(
> //
> // Thanks in advance!
> //
> //
> // -
> // Best regards,
> // Brian
> //
> //
+-----------------------------------------------------------------------+
> // | Brian T. Huntley Systems and Network
Engineer |
> // | Campus Information Services, Clarkson University
|
> // | Ph/FAX: 315.268-2292/6570
|
> // | bth AT clarkson DOT edu
www.clarkson.edu/cis |
> //
+-----------------------------------------------------------------------+
> // UNIX *is* user friendly. It's just selective about who its friends
are.
> // PGP Public Key available. finger bth AT clarkson DOT edu
> //
>
> -
> Best regards,
> Brian
>
>
+-----------------------------------------------------------------------+
> | Brian T. Huntley Systems and Network Engineer
|
> | Campus Information Services, Clarkson University
|
> | Ph/FAX: 315.268-2292/6570
|
> | bth AT clarkson DOT edu www.clarkson.edu/cis
|
>
+-----------------------------------------------------------------------+
> UNIX *is* user friendly. It's just selective about who its friends
are.
> PGP Public Key available. finger bth AT clarkson DOT edu
|
