Check your device class maount limit value and increase it




Gerardo Zapata <gzapata AT AVANTEL DOT NET> on 02/16/2000 12:11:36 PM

Please respond to "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>

To:   ADSM-L AT VM.MARIST DOT EDU
cc:    (bcc: Angelo DeAngelis/Tivoli Systems)
Subject:  Can't do reclamation



Server: TSM V3.7 on Windows NT 4.0.
Device: 3570 library with one drive.
I have set the reclamation percentage to 40% for the TAPE storage pool. There
are several volumes  belonging to this stgpool with a status of 'full' and an
Utilization Percentage of 40, 50, 60, 80 where the reclamation process should be
running but it si not.
I have move the reclamation percentage with no results.
I have run the 'q stg TAPE f=d' and found that nothing was set for the
'reclaimstg' parameter. I have defined a new sequential acces storage pool
(RECLAIM) and set it as the 'reclaimstg' for the TAPE storage pool. As I did
this the reclamation prcess started, the server prompted for a volume that was
already checked in to the library then the process ended with a status of
'FAILURE' with the following message:

ANR1082W. Space reclamation terminated for volume XXXX - insufficient number of
mount points available for removable media.

Any suggestion to solve this??

Thanks in advance.
Regards

Gerardo Zapata Gonzalez
Tivoli Proffessional Services/TSM
IBM de Mixico
(52 5) 270 5740