Thanx Tom, you were right !!!

"Kauffman, Tom" schrieb:

> Check the dsm.sys file in /usr/lpp/adsm/api/bin -- I've seen this as both a
> link to the dsm.sys under /usr/lpp/adsm/bin, and as a copy of what had been
> in /usr/lpp/adsm/bin.
>
> TomK
>
> -----Original Message-----
> From: Karsten Hüttmann [mailto:Karsten.Huettmann AT CARUS DOT DE]
> Sent: Friday, February 04, 2000 6:21 AM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Re: Backint couldn't connect to ADSM-Server after changing
> IP-Address
>
> The Servername corresponds with the entry in the client's dsm.sys file.
> Otherwise something like this happens.
>
> BKI0035I: Enter your ADSM-Server password again:
> BKI0018E: There is a problem with ADSM-Server 'ADSMSERV1' :
> 'ANS1217E (RC409)  Server name not found in System Options File'
> BKI0020I: End of backint program at: Fri Feb  4 12:13:02 2000.
> BKI0021I: Elapsed time: 11 sec.
>
> But there's no additional output. The backint program just hangs for a few
> minutes
> and the prompt appears again.
>
> BTW: Here's an output of the tracefile:
>
> 12:15:04.669 [00] log_msg.c [ 258]: "BKI0005I: Start of backint program at:
> Fri Feb  4 12:15:04 2000."
> 12:15:42.352 [00] adsm_tools.c[ 797]: "API Library Version = 3.1.7"
> 12:15:42.353 [00] adsm_tools.c[ 990]: "calling dsmInit()
> '-SERVERNAME=ADSMSERV'"
> 12:16:58.434 [00] adsm_tools.c[1018]: "TCP/IP FAILURE for server 'ADSMSERV'
> -
> 1. retry"
>
> Matthias Hensel schrieb:
>
> > Besides the dsm.sys File you find a definition of the ADSM server in the
> > backint profile initSID.utl .
> > This file normaly resides in X:\orant\database (NT) or /oracle/SID/dbs
> > (Unix) in this file you find an entry like the following one:
> >
> > SERVER          BE0026
> >     SESSIONS            1
> >     PASSWORDREQUIRED    YES
> >     ADSMNODE        C80
> >     BRBACKUPMGTCLASS    SAP_MGT
> >     BRARCHIVEMGTCLASS   SAP_MGT
> >
> > Now you should ensure that the Name (or IP-Adress) you specify here
> > corresponds with the ADSM Server name that you use in the dsm-File.
> > For NT it is important that the Server name corresponds with the name of
> > the options-File (a little special design...).
> >
> > Hope this helps
> > Matthias
> >
> > Karsten Hüttmann <Karsten.Huettmann AT CARUS DOT DE> am 04.02.2000 08:18:28
> >
> > Bitte antworten an "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
> >
> > An:   ADSM-L AT VM.MARIST DOT EDU
> > Kopie:     (Blindkopie: Matthias Hensel/BE/USR/SHG)
> >
> > Thema:    Re: Backint couldn't connect to ADSM-Server after changing
> >       IP-Address
> >
> > Yes, thank you.
> > I resetted the password.
> > I changed the values in the dsm.sys file from ip-address to hostname and
> > back.
> >
> > I re-started the server.
> > I think I tried everthing I could do.
> > But in the actlog there's no entry that a session became established.
> > Strange thing - the client and backint use the sam dsm.sys and only the
> > client
> >
> > tries to establish a connection, the other one hangs...
> >
> > Nick Cassimatis schrieb:
> >
> > > Did you try resetting the client password at the server?  Give that a
> > shot
> > > - I had similar problems, and that fixed it.  I don't know why it broke
> > on
> > > me, but the reset, then doing the password update with backint, got me
> > > working again.
> > >
> > > Nick Cassimatis
> > > nickpc AT us.ibm DOT com
> > >
> > > If you don't have the time to do it right the first time, where will you
> > > find the time to do it again?
> >
> > --
> > Mit freundlichen Grüssen / with best regards
> > Karsten Hüttmann
>
> --
> Mit freundlichen Grüssen / with best regards
> Karsten Hüttmann

--
Mit freundlichen Grüssen / with regards
Mit freundlichen Grüssen / with regards
Karsten Hüttmann