Re: Copy Storage Pool
1999-12-13 11:09:06
Hi,
Volumes are assigned to a single storage pool.
Therefore you will have to delete the T11 to T19 volumes
from your storage pool. If you have any data on those
volumes, move it so you won4t lose it.
After deleted, next time you check them in, they will
be scratch volumes.
Now you should assign them to the Copy Storage Pool,
same way they are assigned to the primary tape pool.
Use "adsm> define volume".
regards,
Rodrigo
From: Alyn Bush <alynbush AT HOTMAIL DOT COM>
Reply-To: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Copy Storage Pool
Date: Mon, 13 Dec 1999 07:30:37 GMT
Hi,
Can somebody help.
We have ADSM server is on AIX-RS/6000, and we are using Magastar 3570 as
tape drive, with 19 libraries. We are planning to use some those tapes as
Copy Storage Pools and some as primary.
Originally they are all assigned to Primary storage pool. Following is the
output of q stg
Operation Results
Storage Device Estimated Pct Pct High Low Next
Pool Name Class Name Capacity Util Migr Mig Mig Storag
(MB) Pct Pct pool
----------- ---------- ---------- ----- ----- ---- --- ----
ARCHIVEPOOL DISK 8.0 0.0 0.0 90 70
BACKUPPOOL DISK 2,000.0 33.1 13.1 61 45 3570BKPOOL
SPACEMGPOOL DISK 8.0 0.0 0.0 90 70
(BACKUPPOOL is Disk Storage Pool and 3570BKPOOL is Tape drive, 3570BKPOOL
has 19 Library, T01 through T19.)
We wanted to assign half (I.E. T01 to T10) to primary pool and other half
to
Copy storage pool (T11 to T19). Then we need to test the following: Write
a schedule to copy data from Primary libraries to Copy pool libraries and
be
able to restore from copy to primary.
Please let me know if you can help.
Thanks,
Alyn
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
|
|
|