Re: 3995 C60 problems

On Thu, Oct 21, 1999 at 08:29:53AM -0500, ADSML wrote:
Thank both of you,
it helped.
I needed to change the devclass to WORM and catalog the drive as /dev/rop0.


> Try defining drive with /dev/rop0 as opposed to /dev/op0
>
> ADSML
>
> ----- Original Message -----
> From: Gyula Bereczky <bx AT MAIL.DATATRANS DOT HU>
> To: <ADSM-L AT VM.MARIST DOT EDU>
> Sent: Thursday, October 21, 1999 7:19 AM
> Subject: 3995 C60 problems
>
>
> > hi,
> > i have a problem with a 3995 C60.
> > Installed software:
> > AIX 4.3.2
> > ADSMSERV for AIX 3.1.2.40
> > 3995 drivers: ( downloaded from ftp://index.storsys.ibm.com/3995/ )
> >   D3995diag.diag             4.2.0.0  COMMITTED  3995-X63 Series Library
> >   D3995diag.jbdd             4.3.0.0  COMMITTED  3995 C Series Library
> Jukebox
> >   D3995diag.oddd             4.3.0.0  COMMITTED  0632 Optical Drive Device
> >
> > Configured:
> > ibmjb0 Available 40-58-00-6,0  IBM 3995-C60 Optical Disk Library
> > lb1    Available 40-58-00-6,0  ADSM Library
> > omd0   Available 40-58-00-1,0  SCSI Read/Write Optical Drive
> > op0    Available 40-58-00-1,0  ADSM Read/Write Optical Drive
> >
> > In ADSM:
> > 3995LIB       SCSI        /dev/lb1
> > 3995LIB       DRIVE0        OPTICAL      /dev/op0          Yes
> >
> > Whenever i try to label a volume in this library i get this message:
> > ANR9999D pspvropt.c(667): PvrODskWrite:  write failed with odskRC = 7
> > ANR8806E Could not write volume label OPT01 on the tape in library
> 3995LIB.
> > ANR8815I Remove volume OPT01 from port element 10 of library 3995LIB.
> > ANR8802E LABEL LIBVOLUME process 2 for library OPT01 failed.
> >
> > Any idea?

                                                        bx
                                        bx AT mail.datatrans DOT hu