I've got a DLT 15 tape library, I also installed and configured a
external DLT drive (the library has one inside). So there are now two
libraries (one manual, one automated) and two drives (one in the
library, one external; on the SCSI chain). Basically I've got volumes
checked out from the library sitting outside, not updated offsite or
anything like that. Just taken out and replaced with some scratch
volumes.
My problem is, I've now got to do a restore. Instead of going through
the hastle of removing a scratch tape from the library, checking in the
volume from the REQUEST into the library (because it's part of this
group I checked out). I'd like to just checkin the volume into the
manual drive. The problem is the manual type library doesn't allow
checkin libvol, and I can't seem to see a "mount" command. I've got the
drive configured correctly, or at least I thought so, and the volume is
in the drive.
Below is some information. The volume I want to checkin is DLT15.
--
adsm> q drive f=d
adsm> q drive f=d
Library Name: EXTDRV
Drive Name: DLTDRV1
Device Type: DLT
Device: /dev/mt1
ON LINE: Yes
Element:
Last Update by (administrator): DASH
Last Update Date/Time: 10/07/1999 10:01:31
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE
Library Name: LXS4115
Drive Name: DLTDRV0
Device Type: DLT
Device: /dev/mt0
ON LINE: Yes
Element: 240
Last Update by (administrator): DASH
Last Update Date/Time: 07/11/1999 00:56:04
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE
adsm> q library f=d
Library Name: EXTDRV
Library Type: MANUAL
Device:
Private Category:
Scratch Category:
External Manager:
Last Update by (administrator): DASH
Last Update Date/Time: 10/07/1999 10:01:17
Library Name: LXS4115
Library Type: SCSI
Device: /dev/lb0
Private Category:
Scratch Category:
External Manager:
Last Update by (administrator): DASH
Last Update Date/Time: 07/11/1999 00:55:31
adsm> q libvol
Library Name Volume Name Status Last Use Home
Element
------------ ----------- ----------------- --------- ------------
LXS4115 DLT16 Private Data 1
LXS4115 DLT16 Private Data 1
LXS4115 DLT17 Private Data 2
LXS4115 DLT18 Scratch 4
LXS4115 DLT19 Private Data 5
LXS4115 DLT20 Private Data 6
LXS4115 DLT21 Scratch 7
LXS4115 DLT22 Private DbBackup 10
LXS4115 DLT23 Private Data 11
LXS4115 DLT24 Private Data 12
LXS4115 DLT25 Scratch 13
LXS4115 DLT26 Scratch 14
LXS4115 DLT27 Scratch 15
LXS4115 DLT3 Private Data 3
LXS4115 DLT8 Scratch 8
LXS4115 DLT9 Scratch 9
adsm> q vol
Volume Name Storage Device Estimated Pct Volume
Pool Name Class Name Capacity Util Status
(MB)
------------------------ ----------- ---------- --------- ----- --------
/adsm/data MSIBKDSK DISK 6,144.0 13.9 On-Line
/adsm/data MSIBKDSK DISK 6,144.0 13.9 On-Line
DLT1 MSIBKTP LXSDLT 31,474.3 67.5 Full
DLT10 MSIBKTP LXSDLT 27,420.7 67.3 Full
DLT11 MSIBKTP LXSDLT 31,419.7 84.3 Full
DLT12 MSIBKTP LXSDLT 41,015.8 65.1 Full
DLT13 MSIBKTP LXSDLT 31,903.9 82.1 Full
DLT14 MSIBKTP LXSDLT 30,551.6 27.0 Full
DLT15 MSIBKTP LXSDLT 36,059.3 19.4 Full
DLT16 MSIBKTP LXSDLT 42,495.0 46.8 Full
DLT17 MSIBKTP LXSDLT 40,851.9 75.3 Full
DLT19 MSIBKTP LXSDLT 39,395.5 97.3 Full
DLT2 MSIBKTP LXSDLT 45,171.7 23.5 Full
DLT20 MSIBKTP LXSDLT 20,480.0 0.3 Filling
DLT23 MSIBKTP LXSDLT 37,155.1 99.8 Full
DLT24 MSIBKTP LXSDLT 20,480.0 39.5 Filling
DLT3 MSIBKTP LXSDLT 41,777.2 61.8 Full
DLT4 MSIBKTP LXSDLT 39,982.4 15.3 Full
DLT5 MSIBKTP LXSDLT 38,542.9 57.9 Full
DLT6 MSIBKTP LXSDLT 40,559.1 94.7 Full
DLT7 MSIBKTP LXSDLT 37,331.7 44.8 Full
adsm> q vol DLT15 f=d
Volume Name: DLT15
Storage Pool Name: MSIBKTP
Device Class Name: LXSDLT
Estimated Capacity (MB): 36,059.3
Pct Util: 19.4
Volume Status: Full
Access: Unavailable
Pct. Reclaimable Space: 82.9
Scratch Volume?: Yes
In Error State?: No
Number of Writable Sides: 1
Number of Times Mounted: 12
Write Pass Number: 1
Approx. Date Last Written: 07/24/1999 02:23:24
Approx. Date Last Read: 07/16/1999 00:56:54
Date Became Pending:
Number of Write Errors: 0
Number of Read Errors: 0
Volume Location:
Last Update by (administrator):
Last Update Date/Time: 07/16/1999 00:56:45
Device Class Name: LXSDLT
Device Access Strategy: Sequential
Storage Pool Count: 2
q devclass LXSDLT
Device Class Name: LXSDLT
Device Access Strategy: Sequential
Storage Pool Count: 2
Device Type: DLT
Format: DRIVE
Est/Max Capacity (MB): 0.0
Mount Limit: 2
Mount Wait (min): 60
Mount Retention (min): 60
Label Prefix: ADSM
Library: LXS4115
Directory:
Server Name:
Retry Period:
Retry Interval:
Last Update by (administrator): DASH
Last Update Date/Time: 10/13/1999 11:24:08
--
Let me know if I am missing something completely, something I noticed
Let me know if I am missing something completely, something I noticed
just now is the devclass is specific to one library. Is that an issue?
How should I have configured this. I'm guessing this shouldn't be that
hard, but maybe I'm missing something.
|