I am attempting to checkin a Mammoth tape cleaning cartridge into an Exabyte
x200 library.  Using the following command  I get the ADSM error message
afterward.

checkin libv "library name lb0.0.0.5"  Cleanerstatus=cleaner cleanings=2
search=yes, no and bulk "Ive tried all three"

When doing so it prompts "Please place cleaning tape into E/E port and issue
reply command"

After doing this I get the following message

09/29/1999 16:10:45 ANR8300E I/O error on library LB0.0.0.5 (OP=8401C058,
CC=314, KEY=05, ASC=3B, ASCQ=0E,
SENSE=70.00.05.00.00.00.00.0A.00.00.00.00.3B.0E.00.00.00.00.,
Description=The source slot or drive was empty in an attempt to move a volume).
  Refer to Appendix B in the 'Messages' manual for recommended action.

It does not even attempt to retrieve cleaning cartridge from E/E port.


Fyi I have also tried bypassing E/E port , plugging cartridge directly into slot
 for cleaner, again with same error message.   I talked with IBM/Tivoli support
, who is not sure why this is happening.


Any suggestions?


Thanks,

Jeff