I'm not familiar with that library; but if you haven't checked the tapes
into adsm, use the LABEL command.  If you checked them into adsm without
checking the labels, you could check them out and then use LABEL to check
them back in.

On Thu, 2 Sep 1999, Berger Thomas wrote:

> Hello
>
> knows everbody a command to relabel tapes in a tape lib. 3575L12. ?
> The volumes are in the lib as scratch tapes.
>
>
>
>
>         Berger Thomas
>
>         ber AT sat-automation DOT com
>