3494 Library Sharing for ADSM sites
2015-10-04 17:40:31
Hi,
Does anybody on the list have any experience with 3494 Lib
sharing
between ADSM Servers ? I am studying the IBM redbook about it,
which is
a little old (1996) but has the major issues adressed.
As far as I have read, basic points are :
- define /dev/lcmp0 for both connected machines
- define 3590 drives for separate machines (dedicated drives for
each
server)
My big doubt is about tape control. I understand ADSM will assign
new
category numbers for private and scratch volumes (like 300 and
301 for
first server, 400 and 401 for next server) so both volume
inventories
won't share tapes. The redbook doesn't go deep into ADSM, so I am
asking
for a little help.
Will I have to load tapes for both the inventories separately,
first one
load for one server and then another for the other ? They will
only be
registered to the library once, labeled and checked in for only
one
server. Has anybody seen/written scripts for automating this
procedure ?
If anybody has had any experience with this problem, please show
me the
path towards ilumination !
TIA,
Rodrig
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- Re: 3494 Library Sharing for ADSM sites, Helms, William H.
- 3494 Library Sharing for ADSM sites, Rodrigo Cordovil Gazzaneo
- Re: 3494 Library Sharing for ADSM sites, Joshua Bassi
- Re: 3494 Library Sharing for ADSM sites, Kelly J. Lipp
- Re: 3494 Library Sharing for ADSM sites, Joshua Bassi
- Re: 3494 Library Sharing for ADSM sites, Roger Hohmann
- Re: 3494 Library Sharing for ADSM sites, Nick Cassimatis
- Re: 3494 Library Sharing for ADSM sites, Rodrigo Cordovil Gazzaneo
- Re: 3494 Library Sharing for ADSM sites, Rodrigo Cordovil Gazzaneo
- Re: 3494 Library Sharing for ADSM sites, Ray Chamberlain
- 3494 Library Sharing for ADSM sites,
ADSM : Dist Stor Manager [mailto:ADSM-L <=
- Re: 3494 Library Sharing for ADSM sites, Joshua Bassi [SMTP:jbassi
- Re: 3494 Library Sharing for ADSM sites, ADSM : Dist Stor Manager [mailto:ADSM-L
|
|
|